brad22486

i have a obd1 ls in my hatch now and just got and obd2 gsr what do i have to do to get it to work. ive been reading and seen people useing the obd2 harness? so if someone can post a better link that i cant seem to find or tell me what to do gonna try and get the swap done this weekend and ecu im using is obd1 p72

speedjunkie_g35

Is your eg wired for vtec already. I just did this swap in my 94 vx. Very easy. I used a obd2 GSR harness and only had to wire knock sensor from shock tower to ecu. Search google for ultimate GSR swap in eg and you should find the link. On my phone otherwise I could give you the link

brad22486

yea already wired for vtec

brad22486

googled and couldnt find what u were talkin about

speedjunkie_g35

https://honda-tech.com/forums/showth...ight=bitch+pin

http://www.ff-squad.com/technet/hybrid.92-95.obd2.htm

speedjunkie_g35

If your using the stock IM than you will have to wire up the secondary butterflies and knock sensor.

brad22486

U wouldnt happen to have a pinout of this would u

speedjunkie_g35

https://honda-tech.com/forums/showth...ight=bitch+pin

This is all I got