OBD1 b16a knock sensor issue
#1
Honda-Tech Member
Thread Starter
OBD1 b16a knock sensor issue
I have a jdm OBD1 B16A in my eg6 and im getting a #23 CEL. Knock sensor. And it is just a random thing. Sometimes it wont come on until i pop vtec but sometimes it comes on immediatley down the road. Im using a obd1 gsr harness and im using a jdm p30 ecu. The color of the knock sensor is black but i used a green plug from the obd1 gsr harness, it has 1 wire. Is the ecu the problem or is it the gsr harness that im using? Or did i use the wrong plug?
And another thing, my o2 sensor cel code popped up as well.
Another thing is, my vtec hits properly and my car doesnt bog or anything but man my car eats a lot of gas.
Modified by BILLisCHILL at 2:16 PM 5/7/2008
And another thing, my o2 sensor cel code popped up as well.
Another thing is, my vtec hits properly and my car doesnt bog or anything but man my car eats a lot of gas.
Modified by BILLisCHILL at 2:16 PM 5/7/2008
Thread
Thread Starter
Forum
Replies
Last Post