crx88fast

I just bought a 93 civic dx with a d16y8 head on it. the owner had thrown a rod through the block. I am planning on fully building this engine for all motor but for now i need to put my sohc zc (non vtec) into the car. So what will i need to do to make this work. Can i get away with not taking off the intake manifold from the y8 head? The car has the stock dx ecu, but the past owner said it was chipped for the vtec. I do not want to convert to obd0 because the other motor will be going back in hopefully before next fall. i searched but nobody really had any answers so let me know so i can get started. thanks Jay

crx88fast

has anybody done this before?

crx88fast

bump

crx88fast

come on somebodys gotta know about this!!!!!!

5lugcivic

as long as the car has fuel and spark then it should work...

thats all i know...

crx88fast

I know that but what do i need to swap from engine to engine to make the zc work in the civic?

ALLMOTA92EG

you need a obd-1 distibutor and obd-1 injectors.

crx88fast

Is that all i need to swap? i dont have to change the intake manifold? or any other sensors?

ALLMOTA92EG

use the same manifold and i think you need a 4 wire o2 sensor but just the one for the d16y8

crx88fast

so i just gotta change the dizzy, o2 sensor, and the injectors?