OBD swap alternator wiring- need a little help.

Reply Subscribe

Thread Tools

Search this Thread

02-02-2007, 05:05 PM

the4g4d

Junior Member

Thread Starter

Join Date: Jun 2006

Location: Durham, NC/ORLANDO, FL

Posts: 55

Likes: 0

Received 0 Likes on 0 Posts

OBD swap alternator wiring- need a little help.

So, I'm throwin an OBD2 alternator on my OBD1 motor and harness. Just got the OBD2 alt harness. I've got the 2 wires color matched but i've got two others that don't. I've got a solid blue, and a white/yellow on the 2 harness. on the obd1 i've got a white/red and a white/green. Need a little help on where these got. I've matched up the black/yellows and the white/blue's. Help me out a little.
Thanks