NS0600's b16 n/a build!
11-09-2008, 05:36 AM
#1
Junior Member
Thread Starter
Join Date: Nov 2006
Location: Greensboro, NC, USA
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
NS0600's b16 n/a build!
Okay guys as you have seen in my want to buy threads, I was looking for parts to build a poor mans Type ARR, but things changed! I came across a
b16a block for a pretty good deal. It was pre bored to .20 over, hot tanked and honed. It also has a block guard. So I will be building this up and shooting for around 185 WHP! This will be dropped in my 96 Civic Ex sedan! Also it will be my DD!
My build list is as follows:
B16a block bored .20 over, block guard
CTR pistons
PR3 shot peened rods
cometic head gasket
ITR Head
Not exactly sure what valve train to go with as of right now
blox cams (still looking at different ones)
Buddy club cam gears
itr intake mani
tri Y big tube header
Arp head studs
Arp rod bolts
Clutch and flywheel are still in the air
no name short ram intake 3 inch
2.5 inch RS*R ex-mag
Theres alot more just cant think right now.......
Not every part is set in stone! Anyway some of this is subject to change and I am open to suggestions! Pics will be up shortly when i get my block on the engine stand tomorrow! Also remember that I am a college student so this will not be a quick build due to funds and time! Obviously I am not building a full on race car, this will be my DD!
b16a block for a pretty good deal. It was pre bored to .20 over, hot tanked and honed. It also has a block guard. So I will be building this up and shooting for around 185 WHP! This will be dropped in my 96 Civic Ex sedan! Also it will be my DD!
My build list is as follows:
B16a block bored .20 over, block guard
CTR pistons
PR3 shot peened rods
cometic head gasket
ITR Head
Not exactly sure what valve train to go with as of right now
blox cams (still looking at different ones)
Buddy club cam gears
itr intake mani
tri Y big tube header
Arp head studs
Arp rod bolts
Clutch and flywheel are still in the air
no name short ram intake 3 inch
2.5 inch RS*R ex-mag
Theres alot more just cant think right now.......
Not every part is set in stone! Anyway some of this is subject to change and I am open to suggestions! Pics will be up shortly when i get my block on the engine stand tomorrow! Also remember that I am a college student so this will not be a quick build due to funds and time! Obviously I am not building a full on race car, this will be my DD!
11-09-2008, 06:20 AM
#3
Junior Member
Thread Starter
Join Date: Nov 2006
Location: Greensboro, NC, USA
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Re: NS0600's b16 n/a build! (mcvtec)
Like I stated in the first post, I have not bought all the parts yet, i am always open to suggestions. Blox cams are not bad choices, they compare with skunk 2 your just paying for the name!
Modified by ns060 at 11:55 AM 11/9/2008
Modified by ns060 at 11:55 AM 11/9/2008
Thread
Thread Starter
Forum
Replies
Last Post
