noise in a p20/b000 tranny
#1
Honda-Tech Member
Thread Starter
Join Date: May 2009
Location: Lincoln, RI
Posts: 1,390
Likes: 0
Received 0 Likes
on
0 Posts
noise in a p20/b000 tranny
just finished replacing the clutch in my 92 dx and at the same time i swapped in a b000 tranny out of a 93 ex.
all is good except when i accelerate in 1st gear and 2second there is a metallic noise. and when i downshift from 3rd to 2nd sometimes it will grind.
i was thinking input shaft bearing, but the noise is not always there. seems like only in 1st and 2nd. i dont recall hearing it in 3rd. but its only when i press the accelerator in those 2 gears.
anyone have any ideas? i really dont like the idea of having to drop the tranny again.
all is good except when i accelerate in 1st gear and 2second there is a metallic noise. and when i downshift from 3rd to 2nd sometimes it will grind.
i was thinking input shaft bearing, but the noise is not always there. seems like only in 1st and 2nd. i dont recall hearing it in 3rd. but its only when i press the accelerator in those 2 gears.
anyone have any ideas? i really dont like the idea of having to drop the tranny again.
Thread
Thread Starter
Forum
Replies
Last Post
feelsfast
Honda CRX / EF Civic (1988 - 1991)
3
07-06-2004 04:33 AM