digitalvice

I was over at crappy tire this morning grabbing some tasimo (weird i know, but its close to the house) anyways i was looking at spark plugs and wires, as thats my project for the day. NGK or E3 for the plugs?
as far as the wires go, i'll most likely stick with NGK.

doood

iTrader: (1)

ngk

goldsy

+1

digitalvice

thats what i was leaning towards...I just heard good things about the e3's.

goldsy

I've always used nothing but NGK's in my Honda's and I've probably had 10 of them over the years and have never had an issue with NGK plugs or wires. I've never tried the E3's but if it ain't broke, don't fix it.

apexi_rsx

E3's are junk ...... all those plugs with more then one electrode to arch to or platmiumm plugs are all junk.... All motors have a specific plug that works best and NGK is best for any honda motor.

sleepyaccord96

E3 plugs are garbage. NGK all the way, or denso if ngk is not available

deschlong

iTrader: (8)

NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK NGK ... or DENSO

digitalvice

lol thanks for that deschlong

deschlong

iTrader: (8)

Also ... if it's time for a full tune-up and/or you want to know which quality aftermarket parts to put on your Civic, have a read here first: https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/%5Bfaq%5D-your-guide-buying-quality-aftermarket-maintenance-parts-your-civic-3114911/

digitalvice

thanks, i was actually looking at that from your sig

hooperoo4

i used e3 in mine.works great

gsrturbo-ek

i have e3 plugs in my 06 crv and i wouldnt buy them again motor runs a lil rough

speedjunkie_g35

In comparison to what... Autolite??? What was used prior? How long have you owned car? Have you owned long enough to be able decipher a difference?


Another vote for NGK. I use in all of my vehicles, mowers, small engines.

Ryan96GSR

NGK. My co-worker ran E3's with no problem but I'm warry about running them in any car. Just my opinion.

I use coppers in my civic. check the gapping before instalation, the V-powers ang G-powers are sometimes off a little.

Mr. Dabolina

In my year of selling car parts I sold a total of 4 E3s. The person who bought them was back a week later for some Delcos for his Chevy. E3s are trash. I wouldnt even take them if they were free. Same goes for anything with a a multitip top.

Buy what the manual recommends. The manufacturer recommends it for a reason.

digitalvice

thanks for the input everyone. I was pretty much sold on NGK anyways, but i had heard some good things about e3, and figured i'd ask.

deschlong

iTrader: (8)

Not only that, but NGKs for our Civics are so bloody inexpensive already that considering anything else BUT the Honda-recommended brands (NGK or DENSO) would be a doubly foolishly unwise investment.