New to HT, not new to Honda's
12-16-2009, 10:44 AM
#1
Thread Starter
Join Date: Dec 2009
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
New to HT, not new to Honda's
Hey everyone, my name is Rich and I just picked up a '94 EG hatch. This isn't my first Honda, but it's been about 6 years since I've owned one. I am looking for some info, but I'm doing some searching first before I start asking questions. One question I do have is about the Phearable.net ECU's. Anyone have any info on them? My hatch has a B16A swap using that ECU and I can honestly say I've never heard of it.
Here's a pic of the car.
Here's a pic of the car.
12-16-2009, 11:28 AM
#2
Honda-Tech Member
Join Date: Jan 2009
Location: Albuquerque, NM
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
Re: New to HT, not new to Honda's
To find the best info u should go to the web site and check them out but they r some old school guys who have been doing it for some time and r good at what they do.
12-16-2009, 02:14 PM
#6
Re: New to HT, not new to Honda's
The company that chipped your ecu, is a vendor here on the forum
https://honda-tech.com/forums/showth...ight=Phearable
nothing but complaments from them, Personally I have never doubt with them so I cannot vouch.
you can personally contact them on the thread or email there site.
https://honda-tech.com/forums/showth...ight=Phearable
nothing but complaments from them, Personally I have never doubt with them so I cannot vouch.
you can personally contact them on the thread or email there site.
12-16-2009, 02:15 PM
#7
Honda-Tech Member
Re: New to HT, not new to Honda's
phearable.net is a good place to get chipped ecu's for swaps. it would be best if you had it tuned since it is set at the base settings.
Trending Topics
12-16-2009, 02:16 PM
#8
Thread Starter
Join Date: Dec 2009
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Re: New to HT, not new to Honda's
Thanks everyone. 
I checked out the website for the ECU and it seems legit, was just hoping to maybe get some input from some that has/is using it and it's limits or capabilities are.
The car has a B16A swap like I said, intake, Apex'i header and VAFC, ITR cams and Blox intake manifold (so I'm told). The exhaust piping is there (not stock) but there is no muffler. My only complaint with it so far is that 3rd grinds pretty bad, and sometimes 4th.
I checked out the website for the ECU and it seems legit, was just hoping to maybe get some input from some that has/is using it and it's limits or capabilities are.The car has a B16A swap like I said, intake, Apex'i header and VAFC, ITR cams and Blox intake manifold (so I'm told). The exhaust piping is there (not stock) but there is no muffler. My only complaint with it so far is that 3rd grinds pretty bad, and sometimes 4th.
Thread
Thread Starter
Forum
Replies
Last Post
Lewis7789
Honda Civic / Del Sol (1992 - 2000)
8
05-29-2004 04:40 PM
