new here... post # 1
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2004
Location: biberach
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
new here... post # 1
as most other people who own a honda, i've known of the honda-tech site for a while. just never visitied. the want for a 96 plus hatch brought me here to ***** the classifieds... while i was here i figured I'd sign up.
anyway, i currently drive a 93 del sol si. basic car as follows: : HP Performance haeder, ghetto intake, tein ss dampers, skunk2 [or should i say junk2] front and rear upper braces, lower tie and short throw shifter. st 3/4 rear sway, brembo cross drilled's with axxis metal master pads and goodridge ss lines.
http://www.solsociety.com/albu...d.jpg
car sits about 1" lower now than in the pics...
anyway, i currently drive a 93 del sol si. basic car as follows: : HP Performance haeder, ghetto intake, tein ss dampers, skunk2 [or should i say junk2] front and rear upper braces, lower tie and short throw shifter. st 3/4 rear sway, brembo cross drilled's with axxis metal master pads and goodridge ss lines.
http://www.solsociety.com/albu...d.jpg
car sits about 1" lower now than in the pics...
#3
Honda-Tech Member
Join Date: Aug 2003
Location: At The Bottom Of A Bottle, AZ, USA
Posts: 1,771
Likes: 0
Received 0 Likes
on
0 Posts
Re: new here... post # 1 (chris c)
Skunk2 is not junk but your car is!
Welcome to H-T! Hope you find a hatch to replace that POS of yours.
Welcome to H-T! Hope you find a hatch to replace that POS of yours.
#4
Re: new here... post # 1 (NA_B16a2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NA_B16a2 »</TD></TR><TR><TD CLASS="quote">Skunk2 is not junk but your car is!
Welcome to H-T! Hope you find a hatch to replace that POS of yours. </TD></TR></TABLE>
Ouch... hows that for a warm welcome!
Welcome
Welcome to H-T! Hope you find a hatch to replace that POS of yours. </TD></TR></TABLE>
Ouch... hows that for a warm welcome!
Welcome
#7
Honda-Tech Member
Thread Starter
Join Date: Nov 2004
Location: biberach
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
skunk2's...
i bought the skunk2 stuff because i did not want to wait for the benen pieces... they just did not live up to my expectations. any bar that is multi-piece, like the skunk, will offer less than a 1 piece design. in addition, the endlinks would not fit over the strut hat bolts without being opened up. fine for a $5 ebay bar but unacceptable when i dropped that much coin for the parts...
i'll do it right with the ek
i'll do it right with the ek
Trending Topics
#8
Honda-Tech Member
Join Date: Jan 2002
Location: Raleigh, NC
Posts: 15,334
Likes: 0
Received 0 Likes
on
0 Posts
Re: skunk2's... (chris c)
Welcome to Honda-Tech.com. Check out the threads at the top of the forum about the rules, faq thread, and the swaps/ECU codes.
Since there is no tech in this thread, it's going to be locked now, as to not clutter a technical forum with non-technical threads.
Thanks and welcome
-Ricey
EG+ moderator
Since there is no tech in this thread, it's going to be locked now, as to not clutter a technical forum with non-technical threads.
Thanks and welcome
-Ricey
EG+ moderator
Thread
Thread Starter
Forum
Replies
Last Post
stevelive3
Acura Integra
18
10-07-2008 10:52 AM
BoostnEK6206
Honda Civic / Del Sol (1992 - 2000)
3
12-13-2007 12:39 PM
foz
Vehicles for sale
10
08-26-2006 07:27 PM