lildewey

I have a 94 del sol B16A/vtec My husband says that I should swap for a b20 or put a k series engin w/ a six speed. What is the difference??

dohcMONSTER

dont know where to begin i would say search and read A LOT, before doing anything. but if you really want to you can buy me a K series

AlphaQup

swap a K-series and sell me your b16
six speed is yummy not to mention more HP.

lildewey

I know a few guys who read sport compact car religously. Is this magazine a reliable source??

IVI

id keep the b16, its a good motor.
its workable.

hondaeg8

boost what you got and tune it.

vtekthis

boosted b16's are fun!!!

soundbomber

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lildewey &raquo;</TD></TR><TR><TD CLASS="quote">I know a few guys who read sport compact car religously. Is this magazine a reliable source??
</TD></TR></TABLE>

imo, best import mag out there

delslowed

so is TURBO magazine..

"Fresh Pizza Guy"

k series with intake header and exhaust puts down very impressive numbers

pdiggitydogg

and say bye bye to powersteering and hello to super high prices on k engine and parts to get it in

keep the b16

skip.two

USDM 94-95 Honda Del Sol VTEC - B16A3 DOHC VTEC
160hp 111lbs/ft tq

there's quite a selection between the K series...
your husband is probably talking about the JDM K20A or the USDM K20A2.

JDM 01+ Honda Integra, and 02+ Honda Civic Hatchback Type R - K20A DOHC i-VTEC
220hp 206lbs/ft torque

USDM 02+ Acura RSX Type S - K20A2 DOHC i-VTEC
200hp 146lbs/ft torque


there's also K20A3 and a K24...

02+ Acura RSX, and 02+ Honda Civic Hatchback Si - K20A3 DOHC i-VTEC
160hp 132lbs/ft torque

02+ Honda CRV - K24 DOHC i-VTEC
160hp 162lbs/ft torque


then there's your Honda CRV B20 engines...

97-98 Honda CRV - B20B DOHC
126hp 133lbs/ft torque

99-01 Honda CRV - B20Z DOHC
146hp 143lbs/ft torque

its really up to you, or your husband if you want to spend the money on another motor.
i say keep the B16, then buy a different motor when that one goes.

EKRacer

I say throw that vtec head on a B20 block!

KiDSoL

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lildewey &raquo;</TD></TR><TR><TD CLASS="quote">I have a 94 del sol B16A/vtec My husband says that I should swap for a b20 or put a k series engin w/ a six speed. What is the difference??</TD></TR></TABLE>

Does he have money or something, k series swaps are hella expensive. Leave the b16a in there thats good enough, why waste the potential it already has.

da935oul

work with what you got, the B16 is good enough unless its high high high miles and your hubby has the $$$$.$$ then do what you want.

OUTKAST_R

drive it until it blows ?

nonsense

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by soundbomber &raquo;</TD></TR><TR><TD CLASS="quote">
imo, best import mag out there </TD></TR></TABLE>

you're kidding right??

jolt-tsp

I think they're trying to keep info like this over in this thread:

https://honda-tech.com/zerothread?id=878010

It all depends on your budget and what you want to do with your car (autox, road race, drag, show, audio, etc)

jdmspec1122

i would say to keep the b16 head and put a b20 block. that or build the b16 or throw a turbo. k20 swaps are really expensive. but if you have the money and really want it, its up to you

NextGenRacing

A Del Sol isn't worth the effort and $$$ it takes to drop a K in. Just drop in a nice turbo kit on that B16 and boost it 'til you blow it.

gloria2323

if you don't know too much about your car just wait a little. throw a dually in there wait for the k series. coming from anither car chick.

RangerHatch

Keep the B16a! The money you would put to have your B16a takin' out and have a K series put in......would not be worth it. Throw some good money down into the engine you have and run w/ it

showtymers619

turbo is th eonly way to go

soundbomber

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nonsense &raquo;</TD></TR><TR><TD CLASS="quote">

you're kidding right??</TD></TR></TABLE>

in <U>MY</U> opinion, you're free to think whatever you want

Deemeetree

Keep your cylinder head.
Buy a B20 block.
With the $$ you saved on the K20, work the block and head.
Turbo it.
Do 12s, enough said.