Need PIC of delsol roll bars! Please post
03-21-2002, 07:49 AM
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Apr 2001
Posts: 692
Likes: 0
Received 0 Likes
on
0 Posts
Need PIC of delsol roll bars! Please post
Gey there in thinking of putting a roll bar in my delsol. so can you guy please post some picture and who or where you got the roll bar from thanks again!
03-21-2002, 12:49 PM
#3
Honda-Tech Member
Join Date: Jan 2001
Location: RICHMOND, VA, USA
Posts: 908
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need PIC of delsol roll bars! Please post (mugendelsol)
no one as far as i know of because i have also been looking for one for my car
03-21-2002, 01:01 PM
#4
Honda-Tech Member
Re: Need PIC of delsol roll bars! Please post (lowsol)
use Art Morrison Enterprises. They will cut and bend all the pipe for you for like $150 and shipping is about another $100. They even supply plates, all you have
to do is cut a few angles on some of the pipes and notch them and weld away... they may be able to help you out!
http://www.artmorrison.com
to do is cut a few angles on some of the pipes and notch them and weld away... they may be able to help you out!
http://www.artmorrison.com
03-22-2002, 04:06 AM
#5
New User
Join Date: Sep 2001
Location: Thornhill, ON, Canada
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need PIC of delsol roll bars! Please post (owen_the_soyboy)
yes
I too have been looking
art morrisson claimed once to make a bolt in application
as did cusco japan
and well
i learned to speak japanese for nothing (mooshi mooshi)
haha
nobody makes a bolt in\
so we have 2 options
1) build a bar that skirts the rear window, comes straight down, with a brace on either side that comes forward at a 30-35 degree angle
2) build a full "cage" that completely encapsulates the cockpit, and keep in mind that it also has to tie into the rear shock towers, which means no rear window function, and cutting through the trunk, making the car...suck for all intents and purposes
I say build the bar, in about a week or so i will begin building mine, I mean, a nice bar that barely intrudes upon the cockpit at all, and has some nice bracing will
a) save our precious skulls should we ever roll over
b) tighten up the chassis as well, make things a bit more tied together
Its really not about style for me
its more about tightenening up the chassis, and protecting my brain in the event of a rollover with r compund
and yes...I do know how hard it is to roll a car
but IF, IF you did, wouldnt you want a rollbar in a sol?
I too have been looking
art morrisson claimed once to make a bolt in application
as did cusco japan
and well
i learned to speak japanese for nothing (mooshi mooshi)
haha
nobody makes a bolt in\
so we have 2 options
1) build a bar that skirts the rear window, comes straight down, with a brace on either side that comes forward at a 30-35 degree angle
2) build a full "cage" that completely encapsulates the cockpit, and keep in mind that it also has to tie into the rear shock towers, which means no rear window function, and cutting through the trunk, making the car...suck for all intents and purposes
I say build the bar, in about a week or so i will begin building mine, I mean, a nice bar that barely intrudes upon the cockpit at all, and has some nice bracing will
a) save our precious skulls should we ever roll over
b) tighten up the chassis as well, make things a bit more tied together
Its really not about style for me
its more about tightenening up the chassis, and protecting my brain in the event of a rollover with r compund
and yes...I do know how hard it is to roll a car
but IF, IF you did, wouldnt you want a rollbar in a sol?
Thread
Thread Starter
Forum
Replies
Last Post
GreenMachineRex
Honda CRX / EF Civic (1988 - 1991)
60
01-18-2004 11:20 AM