need to know some specifics on valves into d16z6...
#1
Thread Starter
Join Date: Sep 2003
Location: Lake City, FL
Posts: 1,215
Likes: 0
Received 0 Likes
on
0 Posts
need to know some specifics on valves into d16z6...
will these work with my set up...
Brand new set of 16 serious race 21-4N stainless valves for the V-Tec Honda and Acura D16Z6, D16Y8 and D16Y7 SOHC 4-valve per cylinder. Heads are 1mm oversize for race engines
Exhaust is 27mm head diameter, stock length, 5.5mm stem, 1-pc stainless steel, swirl polished, hard tip, hard stem, 10,500rpm+
Intake is 31mm head diameter, stock length, 5.5mm stem, 1-piece, stainless steel, swirl polished, hard tip, hard stem, 10,500rpm+.
Im having the head ported and polished W/ a 3 angle valve job...
Will these work!? Please help
Brand new set of 16 serious race 21-4N stainless valves for the V-Tec Honda and Acura D16Z6, D16Y8 and D16Y7 SOHC 4-valve per cylinder. Heads are 1mm oversize for race engines
Exhaust is 27mm head diameter, stock length, 5.5mm stem, 1-pc stainless steel, swirl polished, hard tip, hard stem, 10,500rpm+
Intake is 31mm head diameter, stock length, 5.5mm stem, 1-piece, stainless steel, swirl polished, hard tip, hard stem, 10,500rpm+.
Im having the head ported and polished W/ a 3 angle valve job...
Will these work!? Please help
Thread
Thread Starter
Forum
Replies
Last Post
Julio@Bisimoto
Southern California (Sales)
18
12-26-2012 12:07 PM
Julio@Bisimoto
Classifieds: Forced Induction
4
12-21-2012 01:34 PM