Need help with System Lean codes
#1
Junior Member
Thread Starter
Join Date: Aug 2003
Location: tucson, AZ, usa
Posts: 644
Likes: 0
Received 0 Likes
on
0 Posts
Need help with System Lean codes
I just picked up my 2000 civic coupe ex d16y8
When I got the car it had the CEL on and codes for bank1 sensor 1 and bank 1 sensor 2 codes so I replaced both o2's since it has 160k on it and they were orginal. Now it is throwing fuel trim lean and system lean bank 1 sensor 1. I sprayed all the vacuum lines with throttle body cleaner and there was no stalling. I clean the thottle body out real good and it is still throwing the same lean codes.
I don't know much about the EK's I was an EF guy for a long time. This obdII **** drives me nuts. I have till thursday to get the CEL out and get it emissioned so I can register it.
Please help
When I got the car it had the CEL on and codes for bank1 sensor 1 and bank 1 sensor 2 codes so I replaced both o2's since it has 160k on it and they were orginal. Now it is throwing fuel trim lean and system lean bank 1 sensor 1. I sprayed all the vacuum lines with throttle body cleaner and there was no stalling. I clean the thottle body out real good and it is still throwing the same lean codes.
I don't know much about the EK's I was an EF guy for a long time. This obdII **** drives me nuts. I have till thursday to get the CEL out and get it emissioned so I can register it.
Please help
Thread
Thread Starter
Forum
Replies
Last Post
Confucius37
Honda Civic / Del Sol (1992 - 2000)
2
09-07-2004 10:25 AM