Need help quickly - Lower Control Arm Bushing (inner) on 2000 Civic EX
#1
Need help quickly - Lower Control Arm Bushing (inner) on 2000 Civic EX
Hi guys, I have my car up on jack stands right now, and the bracket for the inner LCA bushing off. The bushing is stuck and I'm not sure if this thing was originally pressed on or if it's simply rusted to heck inside. Here's a picture of what I'm talking about:
Link in case that photo doesn't show up: http://cdn1.iofferphoto.com/img/item...182007_003.jpg
The rubber bushing on the far right of the picture is what I'm trying to get off. Any techniques, or does this have to be pressed off/on? Service manual isn't specific. Thanks
Update: Based on some Googling, they'll come off with a gear puller. But since there's not enough clearance, I'll have to take the entire LCA off, which is a project for next summer. Good luck to anyone who has to do the same thing!
Link in case that photo doesn't show up: http://cdn1.iofferphoto.com/img/item...182007_003.jpg
The rubber bushing on the far right of the picture is what I'm trying to get off. Any techniques, or does this have to be pressed off/on? Service manual isn't specific. Thanks
Update: Based on some Googling, they'll come off with a gear puller. But since there's not enough clearance, I'll have to take the entire LCA off, which is a project for next summer. Good luck to anyone who has to do the same thing!
Last edited by dele22; 12-03-2011 at 04:34 PM.
Thread
Thread Starter
Forum
Replies
Last Post
skaternak
Honda Civic / Del Sol (1992 - 2000)
2
08-11-2017 12:37 PM
MXHowes
Honda Civic (2001 - 2005)
4
01-16-2011 07:17 AM
johnnyboi4o1
Suspension & Brakes
9
01-15-2011 10:02 PM
killaj12
Honda Civic / Del Sol (1992 - 2000)
2
01-28-2007 08:03 PM