one8toh8

Hi everyone, i have been out of the game for a little bit but i just got me a new car its a 94 civic cx hatch and im getting the project started, I have been searching for about two days now and im still coming up empty handed, what im looking for is some insight and how 2's on installing a jdm climate control unit, i now this has been covered before so pls dont start with the search thing. i just need a little guidence my friends, and thank you in advance.

x_outlaw_x

you just pull the faceplate off of the usdm one and put the faceplate of the jdm one and be sure to replace the light bulbs in it

one8toh8

is there any screws and are you sure i dont have to take the old open completely out, thanks any one else have any good info

x_outlaw_x

yeah, you have to pull the old one completely out and just change out the face plates...because the jdm one is controleld electronically and the usdm one is controlled by rods...there is 2 bolts underneath it 8mm i believe and then a few philipps screws holding the faceplate on

one8toh8

thanks hopefully when i get it it wont be to hard

x_outlaw_x

do a search on yahoo.com for it

one8toh8

aight thanks

mc

https://honda-tech.com/zerothread?id=661308

one8toh8

taht was great thanks for the link, thats exactly what i needed, thank you again