NEED: Any D series CC measurements. I.E. Piston domes, head gaskets, chambers.
#1
Honda-Tech Member
Thread Starter
NEED: Any D series CC measurements. I.E. Piston domes, head gaskets, chambers.
Looking to help develope a compression calculator for D series.
Need measurements of any and all D series parts.
Need measurements of any and all D series parts.
#3
Honda-Tech Member
Thread Starter
Re: NEED: Any D series CC measurements. I.E. Piston domes, head gaskets, chambers. (Spade)
D16Y8 Cylinder Head CC's = 32.8
D16Y7 Cylinder Head CC's = 34.6
D16Z6 Cylinder Head CC's = 34.6
D16A6 Cylinder Head CC's = 38
Rod/Stroke ratio for all of these is 1.52:1
D16Y7 Cylinder Head CC's = 34.6
D16Z6 Cylinder Head CC's = 34.6
D16A6 Cylinder Head CC's = 38
Rod/Stroke ratio for all of these is 1.52:1
#4
Re: NEED: Any D series CC measurements. I.E. Piston domes, head gaskets, chambers. (Spade)
D15B8-38.2cc 1.59
D15Z1-25.3cc 1.62
D15b7-38cc 1.59
D16Y5-32.8cc 1.52
what else did you need exactly bore, stroke, cylinder vol, engine displacement
[Modified by RiceD16, 5:14 PM 11/26/2002]
D15Z1-25.3cc 1.62
D15b7-38cc 1.59
D16Y5-32.8cc 1.52
what else did you need exactly bore, stroke, cylinder vol, engine displacement
[Modified by RiceD16, 5:14 PM 11/26/2002]
#5
Honda-Tech Member
Thread Starter
Re: NEED: Any D series CC measurements. I.E. Piston domes, head gaskets, chambers. (RiceD16)
Head gaskets.
Bores
Strokes
Piston to deck height
Pistons dish/dome
Bores
Strokes
Piston to deck height
Pistons dish/dome
#6
Re: NEED: Any D series CC measurements. I.E. Piston domes, head gaskets, chambers. (Spade)
All have 75 mm bore D16A1, D16A8/9 ZC, D16A6, D16Z6, D16Y7, D16Y8 all have 89.99 mm strokes, D15's have 84.5mm stroke, D17's have 94.4mm stroke.
D15's have 134mm rods, A1, A6, A8/9, Z6, Y7/8 all have 137mm rods.
Y8 and Z6 have 0.037" thick headgasket and A1,A6, A8/9, have 0.048" head gasket.
A6, Z6, Y7/8 all have 212.0138mm deck height.
A6, Z6, Y7/8 all have Piston comp heights of 29.3116mm. D15s have piston comp heights of 30.7mm
Hope this helps out.
[Modified by redcxhatch, 1:21 AM 11/27/2002]
D15's have 134mm rods, A1, A6, A8/9, Z6, Y7/8 all have 137mm rods.
Y8 and Z6 have 0.037" thick headgasket and A1,A6, A8/9, have 0.048" head gasket.
A6, Z6, Y7/8 all have 212.0138mm deck height.
A6, Z6, Y7/8 all have Piston comp heights of 29.3116mm. D15s have piston comp heights of 30.7mm
Hope this helps out.
[Modified by redcxhatch, 1:21 AM 11/27/2002]
#7
Honda-Tech Member
Thread Starter
Re: NEED: Any D series CC measurements. I.E. Piston domes, head gaskets, chambers. (redcxhatch)
Let's see if the day crew can add anything.
Trending Topics
#9
Honda-Tech Member
Join Date: Jul 2002
Location: Chicagoland, usa
Posts: 5,695
Likes: 0
Received 0 Likes
on
0 Posts
Re: NEED: Any D series CC measurements. I.E. Piston domes, head gaskets, chambers. (Spade)
Mista Bone would probably have some info he could contribute.
Thread
Thread Starter
Forum
Replies
Last Post
lillthingz
Honda CRX / EF Civic (1988 - 1991)
17
08-14-2004 04:58 PM
JV
All Motor / Naturally Aspirated
11
11-20-2003 04:44 PM
JV
Honda Civic / Del Sol (1992 - 2000)
0
11-19-2003 12:10 PM