name this bumper??
04-14-2009, 02:57 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2008
Location: wexford, Ireland, Ireland
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
name this bumper??
has anybody ever seen this front extension for the EG?
its on my car for a while, i got it for nothing but never found out what it was!
before we start i know its dirty and i need a full respray.
all in good time! kust making it go and stop quick for now!!
you can see where it comes half way up the bumper and its quite roundy!
sorry about the pics, it was getting dark when i took them this evening.
its on my car for a while, i got it for nothing but never found out what it was!
before we start i know its dirty and i need a full respray.
all in good time! kust making it go and stop quick for now!!
you can see where it comes half way up the bumper and its quite roundy!
sorry about the pics, it was getting dark when i took them this evening.
04-14-2009, 03:33 PM
#3
Honda-Tech Member
Thread Starter
Join Date: Jun 2008
Location: wexford, Ireland, Ireland
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Re: name this bumper??
no its not moulded, just a tight fit.
iv searched with google and the like but just cant find anything.
its good strong pastic too not fibreglass!
iv searched with google and the like but just cant find anything.
its good strong pastic too not fibreglass!
04-14-2009, 05:14 PM
#6
Honda-Tech Member
Join Date: Jan 2003
Location: can't find parking in baltimore
Posts: 3,156
Likes: 0
Received 0 Likes
on
0 Posts
Re: name this bumper??
lol sorry!
bump
have you tried postin it up in the appearance/cosmetic forum?
they might be better at it than us grease monkeys
bump
have you tried postin it up in the appearance/cosmetic forum?
they might be better at it than us grease monkeys
Trending Topics
04-15-2009, 03:55 PM
#12
Honda-Tech Member
Thread Starter
Join Date: Jun 2008
Location: wexford, Ireland, Ireland
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
04-16-2009, 03:16 PM
#16
Honda-Tech Member
Thread Starter
Join Date: Jun 2008
Location: wexford, Ireland, Ireland
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Re: name this bumper??
Carrier had to be machined down to fit between hub and disc.the honda one is only about 7-8 mm thick where the evo one is over 20mm.
then of course the holes dont line up so they were filled with weld which is alot stronger than the cast carrier and very hard to drill!!
lined it all up after redrilling the evo discs to 4x100 then drilled new holes and tapped them for new bolts.
the original fluid line fits up fine.
pedal wasnt great at first but only because i was using the smaller master cylinder from the 1.5 sohc.
once i fitted the bigger one from the doch vtec del sol i crashed it was all fine.
Thread
Thread Starter
Forum
Replies
Last Post
