N/A d16y8
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2006
Location: gboro, nC
Posts: 684
Likes: 0
Received 0 Likes
on
0 Posts
N/A d16y8
Ok im going start ordering parts in about 2-3 weeks for my first project..please dont go off topic and say go with B or w/e...thx
Block:
SRP 10:5.1 .20 bore
Eagle rods
ACL bearing set
stock crank
Block guard
Head:
Stage 2 Crower cam
Aem Adjustable Cam gear
Crower valve springs and retainers
New valve stems
Elderbrock performer X Intake manifold
Passwordjdm Whale ***** intake
Bisimoto Race headers
Going to put a 200 shot of Nitrous through it
Questions:
What size TB should i use?
What Size Injectors?
Any other suggestions would be nice..thx
Block:
SRP 10:5.1 .20 bore
Eagle rods
ACL bearing set
stock crank
Block guard
Head:
Stage 2 Crower cam
Aem Adjustable Cam gear
Crower valve springs and retainers
New valve stems
Elderbrock performer X Intake manifold
Passwordjdm Whale ***** intake
Bisimoto Race headers
Going to put a 200 shot of Nitrous through it
Questions:
What size TB should i use?
What Size Injectors?
Any other suggestions would be nice..thx
#3
Honda-Tech Member
Join Date: Jan 2007
Location: Top Secret
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Help for oiling problems, notching the block and better alternative to a block guard
http://theoldone.com/articles/..._tips
I'd go with 450's to be safe and they are easy to find
http://theoldone.com/articles/..._tips
I'd go with 450's to be safe and they are easy to find
#4
Re: N/A d16y8 (chadalac1712)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by chadalac1712 »</TD></TR><TR><TD CLASS="quote">Ok im going start ordering parts in about 2-3 weeks for my first project..please dont go off topic and say go with B or w/e...thx
Block:
SRP 10:5.1 .20 bore
Eagle rods
ACL bearing set
stock crank
Block guard
Head:
Stage 2 Crower cam
Aem Adjustable Cam gear
Crower valve springs and retainers
New valve stems
Elderbrock performer X Intake manifold
Passwordjdm Whale ***** intake
Bisimoto Race headers
Going to put a 200 shot of Nitrous through it
Questions:
What size TB should i use?
What Size Injectors?
Any other suggestions would be nice..thx
</TD></TR></TABLE>
sorry bud but nos is a form of boost so it wont be a N/A setup
Block:
SRP 10:5.1 .20 bore
Eagle rods
ACL bearing set
stock crank
Block guard
Head:
Stage 2 Crower cam
Aem Adjustable Cam gear
Crower valve springs and retainers
New valve stems
Elderbrock performer X Intake manifold
Passwordjdm Whale ***** intake
Bisimoto Race headers
Going to put a 200 shot of Nitrous through it
Questions:
What size TB should i use?
What Size Injectors?
Any other suggestions would be nice..thx
</TD></TR></TABLE>
sorry bud but nos is a form of boost so it wont be a N/A setup
Thread
Thread Starter
Forum
Replies
Last Post
96ls_vtec_teg
All Motor / Naturally Aspirated
3
01-27-2008 07:28 PM
NathanMorris
For Sale
3
04-25-2007 10:45 AM