my hatchie---pics/plans/open suggestions
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2003
Location: Pittsburgh, PA
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
my hatchie---pics/plans/open suggestions (56k take your time)...more pics on page 2
when i bought it. bone friggin stock, automatic Dx.
sorry for the sideways picture
amber corners and hella driving lights
smoked the amber
suspension install
FINALLY---the slammed SOHC
most recent pics---
auto -> 5spd swap..dont worry
suspension
-eibach sportlines from 88-91 civic
-integra GSR rear LCAs/shocks
-stock front shocks
interior
-partial gut---goal of ~2200 lbs
-type aaarrrgh shift ****
-pioneer headunit
-sony 200w fronts
-whistler radar detector
-autometer CF lite guages (useless for now..was planning on going turbo)
previously
-rockford 8awg wiring kit
-kenwood baller 800w amp with pretty blue light
-alpine typeR 12" DVC sub
-sealed qLOGIC hatch box
making it go
-d15b7
-auto - > manual
-ES oval cat-back
by spring
-d15b7 block
-d16z6 head
-LS throttlebody
-d16y8 headgasket
-ex/si tranny
-exedy clutch
-basic I/H/E bolt ons
-high flow cat...maybe test pipe if it doesnt cackle
-mild Zex cam
-p28
hopefully low 15's..high 14s if i'm lucky
there's other random stuff like the smoked corners and stuff...but you can see that so whatever. comments/flames/whatever are welcome
EDIT* i know i'll get some comments about the steelies---just so you know i'm picking up bronze Konig Rush from a friend for spring.
Modified by g4hatchie at 4:39 PM 10/31/2003
Modified by g4hatchie at 4:42 PM 10/31/2003
Modified by g4hatchie at 5:12 AM 11/1/2003
sorry for the sideways picture
amber corners and hella driving lights
smoked the amber
suspension install
FINALLY---the slammed SOHC
most recent pics---
auto -> 5spd swap..dont worry
suspension
-eibach sportlines from 88-91 civic
-integra GSR rear LCAs/shocks
-stock front shocks
interior
-partial gut---goal of ~2200 lbs
-type aaarrrgh shift ****
-pioneer headunit
-sony 200w fronts
-whistler radar detector
-autometer CF lite guages (useless for now..was planning on going turbo)
previously
-rockford 8awg wiring kit
-kenwood baller 800w amp with pretty blue light
-alpine typeR 12" DVC sub
-sealed qLOGIC hatch box
making it go
-d15b7
-auto - > manual
-ES oval cat-back
by spring
-d15b7 block
-d16z6 head
-LS throttlebody
-d16y8 headgasket
-ex/si tranny
-exedy clutch
-basic I/H/E bolt ons
-high flow cat...maybe test pipe if it doesnt cackle
-mild Zex cam
-p28
hopefully low 15's..high 14s if i'm lucky
there's other random stuff like the smoked corners and stuff...but you can see that so whatever. comments/flames/whatever are welcome
EDIT* i know i'll get some comments about the steelies---just so you know i'm picking up bronze Konig Rush from a friend for spring.
Modified by g4hatchie at 4:39 PM 10/31/2003
Modified by g4hatchie at 4:42 PM 10/31/2003
Modified by g4hatchie at 5:12 AM 11/1/2003
#2
Member
Join Date: Apr 2002
Location: La Primera Guete, United States
Posts: 5,132
Likes: 0
Received 0 Likes
on
0 Posts
Re: my hatchie---pics/plans/open suggestions (g4hatchie)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by g4hatchie »</TD></TR><TR><TD CLASS="quote">
**i'm still posting pics/info---i accidentally hit enter...i'm editing the post at the moment</TD></TR></TABLE>
You did not just post this pic!!! LOLL!!! Bwuahahah!!! j00r g0nna get 0wn3d!!!!
**i'm still posting pics/info---i accidentally hit enter...i'm editing the post at the moment</TD></TR></TABLE>
You did not just post this pic!!! LOLL!!! Bwuahahah!!! j00r g0nna get 0wn3d!!!!
#3
Honda-Tech Member
Thread Starter
Join Date: Feb 2003
Location: Pittsburgh, PA
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Re: my hatchie---pics/plans/open suggestions (EVIL_EKology)
yeah that's NOT me in the picture...thats my friend nick. (88hondahatch)
i deserve to get own3d hardcore for it---so bring it on
i deserve to get own3d hardcore for it---so bring it on
#4
Honda-Tech Member
Join Date: Nov 2002
Location: Augusta, GA
Posts: 1,612
Likes: 0
Received 0 Likes
on
0 Posts
Re: my hatchie---pics/plans/open suggestions (g4hatchie)
Looks good man, nothing wrong with rockin the stock wheels. Beat them up through the winter and get some nice wheels in the spring. Smart move on the auto->manual.
Forgot to say you could have at least cleaned up the damn interior.
Forgot to say you could have at least cleaned up the damn interior.
#5
Honda-Tech Member
Thread Starter
Join Date: Feb 2003
Location: Pittsburgh, PA
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Re: my hatchie---pics/plans/open suggestions (96coupe)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 96coupe »</TD></TR><TR><TD CLASS="quote">
Forgot to say you could have at least cleaned up the damn interior. </TD></TR></TABLE>
i know i know. i just wanted proof that i wasnt slushy anymore
Forgot to say you could have at least cleaned up the damn interior. </TD></TR></TABLE>
i know i know. i just wanted proof that i wasnt slushy anymore
#6
Join Date: Oct 2003
Location: orlando, fl, United States
Posts: 533
Likes: 0
Received 0 Likes
on
0 Posts
Car looks good, your making progress, i would suggest getting oem foglights and maybe an oem lip if you don't have one. The foglights you have right now do look to great.
#7
Honda-Tech Member
Join Date: Dec 2001
Location: Igloo County
Posts: 421
Likes: 0
Received 0 Likes
on
0 Posts
Re: my hatchie---pics/plans/open suggestions (g4hatchie)
Everin is lookin fly so far...good choice in converting auto --> manual..
Seein your mods for next spring, since you are going to change your intake manifold you should consdier grabbing the Edelbrock intake manifold for the SOHC engine..
other than that good luck with the project.....
Seein your mods for next spring, since you are going to change your intake manifold you should consdier grabbing the Edelbrock intake manifold for the SOHC engine..
other than that good luck with the project.....
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Feb 2003
Location: Pittsburgh, PA
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Re: (spoonfedcoupe)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spoonfedcoupe »</TD></TR><TR><TD CLASS="quote">Car looks good, your making progress, i would suggest getting oem foglights and maybe an oem lip if you don't have one. The foglights you have right now do look to great. </TD></TR></TABLE>
-hitting an unavoidable bump at 80mph = no more foglights
-the fact that i can hit a bump at 80mph and lose my foglights = no plan for an OEM lip until my car isnt so low
-hitting an unavoidable bump at 80mph = no more foglights
-the fact that i can hit a bump at 80mph and lose my foglights = no plan for an OEM lip until my car isnt so low
#9
Honda-Tech Member
Thread Starter
Join Date: Feb 2003
Location: Pittsburgh, PA
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Re: my hatchie---pics/plans/open suggestions (EL-Driver)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EL-Driver »</TD></TR><TR><TD CLASS="quote">
Seein your mods for next spring, since you are going to change your intake manifold you should consdier grabbing the Edelbrock intake manifold for the SOHC engine..
</TD></TR></TABLE>
got a good deal on the z6 manifold port matched for the LS TB....but i'm considering edelbrock or skunk2 down the road
Seein your mods for next spring, since you are going to change your intake manifold you should consdier grabbing the Edelbrock intake manifold for the SOHC engine..
</TD></TR></TABLE>
got a good deal on the z6 manifold port matched for the LS TB....but i'm considering edelbrock or skunk2 down the road
#11
Honda-Tech Member
Thread Starter
Join Date: Feb 2003
Location: Pittsburgh, PA
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Re: (FuZioNxMaxBoost)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FuZioNxMaxBoost »</TD></TR><TR><TD CLASS="quote">cool..I've never seen a tranny conversion on a d series before, good job. </TD></TR></TABLE>
it was a beeotch. you need a custom tranny mount on the EG. the chassis mount location is in a different position on the auto chassis vs. the manual.
it was a beeotch. you need a custom tranny mount on the EG. the chassis mount location is in a different position on the auto chassis vs. the manual.
#13
Junior Member
Join Date: Mar 2002
Location: Greensburg, PA
Posts: 978
Likes: 0
Received 0 Likes
on
0 Posts
tool
ha its ashame that picure didnt show my burnt *** back too that would have made it even more of an ownded pic
cause 6 hours of sun beating down on your back just make the fact that the job should have taken 1 hour even worse
BTW: being that you have alot of the parts and we have access to cheap ECU programing/tuning, i still think you should turbo...........pansy
ha its ashame that picure didnt show my burnt *** back too that would have made it even more of an ownded pic
cause 6 hours of sun beating down on your back just make the fact that the job should have taken 1 hour even worse
BTW: being that you have alot of the parts and we have access to cheap ECU programing/tuning, i still think you should turbo...........pansy
#14
Honda-Tech Member
Thread Starter
Join Date: Feb 2003
Location: Pittsburgh, PA
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Re: (TEAM JSJ)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TEAM JSJ »</TD></TR><TR><TD CLASS="quote">nice start
btw how did you take out that bolt?drill it out?</TD></TR></TABLE>
well we tried... we got most of the way through with a small drill bit...and just as we were about to change over to the bigger bit the damn thing snapped. i said screw it and bought the GSR LCA's
btw how did you take out that bolt?drill it out?</TD></TR></TABLE>
well we tried... we got most of the way through with a small drill bit...and just as we were about to change over to the bigger bit the damn thing snapped. i said screw it and bought the GSR LCA's
#15
Honda-Tech Member
iTrader: (1)
Join Date: Oct 2001
Location: NOVA, but OC MD for the summers, 10th St., Tyson R.I.P, USA
Posts: 2,616
Likes: 0
Received 0 Likes
on
0 Posts
Re: my hatchie---pics/plans/open suggestions (EVIL_EKology)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EVIL_EKology »</TD></TR><TR><TD CLASS="quote">
You did not just post this pic!!! LOLL!!! Bwuahahah!!! j00r g0nna get 0wn3d!!!!</TD></TR></TABLE>
thats too funny.
You did not just post this pic!!! LOLL!!! Bwuahahah!!! j00r g0nna get 0wn3d!!!!</TD></TR></TABLE>
thats too funny.
#20
Junior Member
Join Date: Mar 2002
Location: Greensburg, PA
Posts: 978
Likes: 0
Received 0 Likes
on
0 Posts
Re: my hatchie---pics/plans/open suggestions (Blazin Si)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Blazin Si »</TD></TR><TR><TD CLASS="quote">HA! good picture of nick.
*note to self: don't let nick work on my car*
j/k </TD></TR></TABLE>
i hate you mike..... it was like 100 that day
*note to self: don't let nick work on my car*
j/k </TD></TR></TABLE>
i hate you mike..... it was like 100 that day
#21
Honda-Tech Member
Re: my hatchie---pics/plans/open suggestions (g4hatchie)
how much did your eibach sportlines lower your car? was thinking of picking up a set of those
#23
Member
Join Date: Jun 2002
Location: St. Pete, FL, USA
Posts: 2,254
Likes: 0
Received 0 Likes
on
0 Posts
Re: my hatchie---pics/plans/open suggestions (integlspwr01)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by integlspwr01 »</TD></TR><TR><TD CLASS="quote">instead of slamming your civic i suggest getting a tan..
</TD></TR></TABLE>That isn't him. Read the thread.
</TD></TR></TABLE>That isn't him. Read the thread.
#24
Honda-Tech Member
Join Date: Sep 2003
Location: Inn, Deea
Posts: 2,525
Likes: 0
Received 0 Likes
on
0 Posts
Re: my hatchie---pics/plans/open suggestions (g4hatchie)
[QUOTE=g4hatchie]when i bought it. bone friggin stock, automatic Dx.
hahahaha
dude your ******* naked, on the ground with nut in your hand
hahaha
pEACe
hahahaha
dude your ******* naked, on the ground with nut in your hand
hahaha
pEACe
#25
Re: my hatchie---pics/plans/open suggestions (g4hatchie)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by g4hatchie »</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>
i see you're ridin with a gangsta lean
</TD></TR></TABLE>
i see you're ridin with a gangsta lean