My H22 del Sol
11-22-2003, 12:12 PM
#1
Junior Member
Thread Starter
Join Date: Apr 2003
Location: Florida
Posts: 670
Likes: 0
Received 0 Likes
on
0 Posts
My H22 del Sol
Hey everyone, I just got some pictures back today of my del Sol that recently got an H22 swap. I have a bunch of pics, but I thought that I would only include a couple so that it wouldn't be so hard on those of you that might have 56k. I'll appreciate any comments you have, good, bad, or just flaming.
JDM cracked taillight
JDM cracked taillight
11-22-2003, 12:30 PM
#6
Junior Member
Thread Starter
Join Date: Apr 2003
Location: Florida
Posts: 670
Likes: 0
Received 0 Likes
on
0 Posts
95cxhatch: Those are OEM springs, but it is dropped in the front a little from the extra weight up there. I think it came out to be a 1" drop in the front almost...I would use aftermarket springs, but the oil pan is SO low as it is...same goes for the header.
CodeDawg: Haven't taken her to the track yet...I am getting slicks this week hopefully so it should be running sometime soon.
STEALTHMODECOUPE: very tight...but as you can see, there is no AC and no power steering, so it has some clearance.
CodeDawg: Haven't taken her to the track yet...I am getting slicks this week hopefully so it should be running sometime soon.
STEALTHMODECOUPE: very tight...but as you can see, there is no AC and no power steering, so it has some clearance.
Trending Topics
11-22-2003, 12:43 PM
#10
Honda-Tech Member
Join Date: Nov 2002
Location: Botswana
Posts: 3,365
Likes: 0
Received 0 Likes
on
0 Posts
Re: (explosive)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by explosive »</TD></TR><TR><TD CLASS="quote">Drive well...turns like ****. But then again, couldn't turn in the first place. As for the install, it's the same as an EG chassis.</TD></TR></TABLE>
Damn, so lots of understeer, eh? It's cool that you added the JDM crack to your taillight. Looks clean.
Sweet ride and nice swap. 
Damn, so lots of understeer, eh? It's cool that you added the JDM crack to your taillight. Looks clean.
Sweet ride and nice swap.
11-22-2003, 12:46 PM
#12
Junior Member
Thread Starter
Join Date: Apr 2003
Location: Florida
Posts: 670
Likes: 0
Received 0 Likes
on
0 Posts
I wouldn't know about the understeer...I mean, I just don't floor it or even gas it much through turns...I did it once and it felt like all four tires, but the front moreso, were losing traction so I decided not to do that again.
But this is a del Sol it could never turn in the first place, but I do know that it felt a hell of a lot more nimble with the D-series engine in there, but to me, it's worth it.
If you haven't noticed from my comments by now, I'll just tell you up front that I take it real easy in this car, it can and will get out of hand with too much throttle and before you know it, you're spinning like crazy.
But this is a del Sol it could never turn in the first place, but I do know that it felt a hell of a lot more nimble with the D-series engine in there, but to me, it's worth it.
If you haven't noticed from my comments by now, I'll just tell you up front that I take it real easy in this car, it can and will get out of hand with too much throttle and before you know it, you're spinning like crazy.
11-22-2003, 12:47 PM
#13
Junior Member
Thread Starter
Join Date: Apr 2003
Location: Florida
Posts: 670
Likes: 0
Received 0 Likes
on
0 Posts
Re: (stock93cx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stock93cx »</TD></TR><TR><TD CLASS="quote">how fast?</TD></TR></TABLE>
I don't know, haven't taken it to the track yet unfortunately, being in college doesn't afford me much time.
But like I said, I should be ordering some slicks sometime this week. When I get those, I'll be down at the track ASAP.
I don't know, haven't taken it to the track yet unfortunately, being in college doesn't afford me much time.
But like I said, I should be ordering some slicks sometime this week. When I get those, I'll be down at the track ASAP.
11-22-2003, 03:13 PM
#15
Join Date: Feb 2003
Location: USA
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
handles like **** ? I dont know man you must not have anything setup right. my car handles great and pulls through the turns good with the little extra weight up front.
I have tokico 5-ways and intrax 2.5" drop springs though. _shrug_
props on the swap. who did it ? I did mine myself so i knew it would be done right. email me and we can get together sometime. Id like to check it out.
XotikSol@Yahoo.com
I coulda swore that little yellow del sol was unstoppable at ustcc .. but it was outlawed because it didnt have rear seats from the factory ?? they were just tired of loosing to a sol. hah.
I have tokico 5-ways and intrax 2.5" drop springs though. _shrug_
props on the swap. who did it ? I did mine myself so i knew it would be done right. email me and we can get together sometime. Id like to check it out.
XotikSol@Yahoo.com
I coulda swore that little yellow del sol was unstoppable at ustcc .. but it was outlawed because it didnt have rear seats from the factory ?? they were just tired of loosing to a sol. hah.
11-22-2003, 03:34 PM
#16
Junior Member
Thread Starter
Join Date: Apr 2003
Location: Florida
Posts: 670
Likes: 0
Received 0 Likes
on
0 Posts
Well...it probably has to do with the fact that I am running the stock suspension. I have no need to drop the car as where I live, I go down all kinds of inclines and declines, so I can't really drop it or else I'll bang the oil pan and header.
I had my swap done by All Version.
I had my swap done by All Version.
11-22-2003, 04:09 PM
#19
Junior Member
Thread Starter
Join Date: Apr 2003
Location: Florida
Posts: 670
Likes: 0
Received 0 Likes
on
0 Posts
Re: (BucsJosh)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BucsJosh »</TD></TR><TR><TD CLASS="quote">How much did it cost you for everything?</TD></TR></TABLE>
Too much.
Too much.
11-22-2003, 05:43 PM
#22
Junior Member
Thread Starter
Join Date: Apr 2003
Location: Florida
Posts: 670
Likes: 0
Received 0 Likes
on
0 Posts
Re: (jDmDxTuRd)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jDmDxTuRd »</TD></TR><TR><TD CLASS="quote">Looks like you need to spend some money on the susepnsion next dog. Nice start on the motor though. So is it pretty fun to drive or what??? </TD></TR></TABLE>
No thanks...the header and oil pan are low enough as it is, plus, it doesn't look that bad. I was talking about it with the guys at the shop that I bought the engine from and they're saying that if I do lower it, to only lower it an inch.
But yeah, it's fun to drive, and it should be even more fun once I get those Skunk2 stage 2 cams in there.
No thanks...the header and oil pan are low enough as it is, plus, it doesn't look that bad. I was talking about it with the guys at the shop that I bought the engine from and they're saying that if I do lower it, to only lower it an inch.
But yeah, it's fun to drive, and it should be even more fun once I get those Skunk2 stage 2 cams in there.
11-22-2003, 05:48 PM
#23
Join Date: Apr 2002
Location: TENNESSEE
Posts: 2,537
Likes: 0
Received 0 Likes
on
0 Posts
Re: (explosive)
Nah dude **** that. Slam the ****. Will handle so much better and look so much nicer. Mine was super low and i only hit the header like twice back when i had my H22.
11-22-2003, 06:35 PM
#24
Junior Member
Thread Starter
Join Date: Apr 2003
Location: Florida
Posts: 670
Likes: 0
Received 0 Likes
on
0 Posts
Re: (jDmDxTuRd)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jDmDxTuRd »</TD></TR><TR><TD CLASS="quote">Nah dude **** that. Slam the ****. Will handle so much better and look so much nicer. Mine was super low and i only hit the header like twice back when i had my H22. </TD></TR></TABLE>
Right there, you can see that the header and oil pan are low enough as it is.
</TD></TR></TABLE> Right there, you can see that the header and oil pan are low enough as it is.
