My first Honda Project! =)
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2006
Location: Buena Park, CA, USA
Posts: 1,074
Likes: 0
Received 0 Likes
on
0 Posts
My first Honda Project! =)
Hi, new on this board and wanted to show you my first Honda project as I've worked with DTM's mostly all my life. I had an E46 M3 and a W211 E55. Here are some pics, the project I have now is an EG Hatch with a K20 motor. Currently it has these mods, acquired it from Mike of AMS. Will keep everyone posted
K20a2 with roughly 20k miles. 3" maderal bent exhaust, 24" burns muffler, Magnaflow muffler
Powdercoated Blue valvecover
Spoon kevelar spark plug cover
Sparks Header
ACT clutch w/ 6-puck
ACT flywheel
PRC intake manifold
Hasport mounts w/ Karcepts rare mount brackets
Driveshaft shop axles
Hondata KPRO w/ a PRB ecu
Hondata intake manifold gasket
AEM wideband gauge w/ UEGO sensor
KOYO full size radiator w/ SPAL fan
Mugen thermostat
Samco hoses
All braided fuel lines w/ AEM FPR and gauge
Golden Eagle Fuel Rail
ITR 1" master cyl
ITR clutch master cyl
Braided clutch line
Modified by teejlc at 2:38 PM 4/29/2007
Modified by teejlc at 2:39 PM 4/29/2007
Modified by teejlc at 2:41 PM 4/29/2007
Modified by teejlc at 3:06 PM 4/29/2007
Modified by teejlc at 3:11 PM 4/29/2007
Modified by teejlc at 3:15 PM 4/29/2007
Modified by teejlc at 3:17 PM 4/29/2007
K20a2 with roughly 20k miles. 3" maderal bent exhaust, 24" burns muffler, Magnaflow muffler
Powdercoated Blue valvecover
Spoon kevelar spark plug cover
Sparks Header
ACT clutch w/ 6-puck
ACT flywheel
PRC intake manifold
Hasport mounts w/ Karcepts rare mount brackets
Driveshaft shop axles
Hondata KPRO w/ a PRB ecu
Hondata intake manifold gasket
AEM wideband gauge w/ UEGO sensor
KOYO full size radiator w/ SPAL fan
Mugen thermostat
Samco hoses
All braided fuel lines w/ AEM FPR and gauge
Golden Eagle Fuel Rail
ITR 1" master cyl
ITR clutch master cyl
Braided clutch line
Modified by teejlc at 2:38 PM 4/29/2007
Modified by teejlc at 2:39 PM 4/29/2007
Modified by teejlc at 2:41 PM 4/29/2007
Modified by teejlc at 3:06 PM 4/29/2007
Modified by teejlc at 3:11 PM 4/29/2007
Modified by teejlc at 3:15 PM 4/29/2007
Modified by teejlc at 3:17 PM 4/29/2007
#2
Honda-Tech Member
Join Date: Jan 2006
Location: Rochester, New York -> Santa Clara, CA
Posts: 10,443
Likes: 0
Received 2 Likes
on
2 Posts
Re: My first Honda Project! =) (teejlc)
The website you're hosting your pictures on doesn't support remote linking.
You need one that does, such as turbocivic (if you can even post pics there) or what I would go with: http://www.photobucket.com
You need one that does, such as turbocivic (if you can even post pics there) or what I would go with: http://www.photobucket.com
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Aug 2006
Location: Buena Park, CA, USA
Posts: 1,074
Likes: 0
Received 0 Likes
on
0 Posts
Re: (projecthatch92)
it's at 221whp now, get the most out of the motor...maybe 260whp...it's a daily driver
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by projecthatch92 »</TD></TR><TR><TD CLASS="quote">nice cars man, what you plan on doing with the honda?</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by projecthatch92 »</TD></TR><TR><TD CLASS="quote">nice cars man, what you plan on doing with the honda?</TD></TR></TABLE>
#9
Honda-Tech Member
Join Date: Apr 2007
Location: wassup, SC
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Re: (teejlc)
You might want to consider blurring the plate on the Bimmer unless you don't have that anymore and the plates are changed...but still... .....nice honda
#12
Honda-Tech Member
Thread Starter
Join Date: Aug 2006
Location: Buena Park, CA, USA
Posts: 1,074
Likes: 0
Received 0 Likes
on
0 Posts
Re: My first Honda Project! =) (95ProjectEJ1)
thanks! its a block from where i live
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 95ProjectEJ1 »</TD></TR><TR><TD CLASS="quote">Went from a $60+ M3, $100k+ E55 AMG to a $2.5k EG + a few grand into mods lol. Must be nice to be able to afford nice rides. Nice pics of the center at Gilbert/Malvern </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 95ProjectEJ1 »</TD></TR><TR><TD CLASS="quote">Went from a $60+ M3, $100k+ E55 AMG to a $2.5k EG + a few grand into mods lol. Must be nice to be able to afford nice rides. Nice pics of the center at Gilbert/Malvern </TD></TR></TABLE>
#13
Honda-Tech Member
iTrader: (5)
Re: My first Honda Project! =) (teejlc)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by teejlc »</TD></TR><TR><TD CLASS="quote">thanks! its a block from where i live
</TD></TR></TABLE>
I used to live a few streets down off Euclid and Ash(by Nicolas Jr. High). You might want to give some people a box of tissue before they look at the pics... someone might blow a load
</TD></TR></TABLE>
I used to live a few streets down off Euclid and Ash(by Nicolas Jr. High). You might want to give some people a box of tissue before they look at the pics... someone might blow a load
#16
Honda-Tech Member
Thread Starter
Join Date: Aug 2006
Location: Buena Park, CA, USA
Posts: 1,074
Likes: 0
Received 0 Likes
on
0 Posts
Re: (hatch-E-vanish)
i just got sick of it, done all that i could with it already...doin the civic coz ima drive it everyday and track it at the same time
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hatch-E-vanish »</TD></TR><TR><TD CLASS="quote">man that ///M3 is HOT!! why you get a honda if i had an m3 ill never go back to a civic lol... </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hatch-E-vanish »</TD></TR><TR><TD CLASS="quote">man that ///M3 is HOT!! why you get a honda if i had an m3 ill never go back to a civic lol... </TD></TR></TABLE>
#18
Honda-Tech Member
Thread Starter
Join Date: Aug 2006
Location: Buena Park, CA, USA
Posts: 1,074
Likes: 0
Received 0 Likes
on
0 Posts
Re: (mjsotelo91)
sold it already
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mjsotelo91 »</TD></TR><TR><TD CLASS="quote">You might want to consider blurring the plate on the Bimmer unless you don't have that anymore and the plates are changed...but still... .....nice honda </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mjsotelo91 »</TD></TR><TR><TD CLASS="quote">You might want to consider blurring the plate on the Bimmer unless you don't have that anymore and the plates are changed...but still... .....nice honda </TD></TR></TABLE>
#19
Ek Forever y0!
Join Date: May 2005
Location: Beating people with a stick, GA
Posts: 16,712
Likes: 0
Received 6 Likes
on
6 Posts
Re: (teejlc)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rainy City »</TD></TR><TR><TD CLASS="quote">bump for a rich guy who drives a civic.</TD></TR></TABLE>
x2
x2
#22
Honda-Tech Member
Re: My first Honda Project! =) (95ProjectEJ1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 95ProjectEJ1 »</TD></TR><TR><TD CLASS="quote">
You might want to give some people a box of tissue before they look at the pics... someone might blow a load </TD></TR></TABLE>
x850104766288105278493785876.03
You might want to give some people a box of tissue before they look at the pics... someone might blow a load </TD></TR></TABLE>
x850104766288105278493785876.03
#24
Ek Forever y0!
Join Date: May 2005
Location: Beating people with a stick, GA
Posts: 16,712
Likes: 0
Received 6 Likes
on
6 Posts
Re: (Drifte)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Drifte »</TD></TR><TR><TD CLASS="quote">awesome rides, where can i get those hood struts?!</TD></TR></TABLE>
it's a tein product. ~$50
it's a tein product. ~$50
Thread
Thread Starter
Forum
Replies
Last Post
5lugSlug
Vehicles for sale
17
05-28-2010 04:48 PM