my dash need help.
11-24-2006, 08:41 PM
#1
Honda-Tech Member
Thread Starter
Join Date: May 2006
Location: blowin caps an rotors, ma, usa
Posts: 619
Likes: 0
Received 0 Likes
on
0 Posts
my dash need help.
question is how hard is this to install if i have a 98 civic dx hatch usdm? and if there are any dyi or anything to help out.
11-24-2006, 11:26 PM
#6
HT White Ops
iTrader: (1)
Join Date: Mar 2006
Location: I see what you did there.
Posts: 16,222
Likes: 0
Received 3 Likes
on
3 Posts
You'll need to have a very complete wiring harness, or a very skilled automotive electrician, and you'll also need to replace your heater blower box with one from a 99-00. It's going to be expensive and hard.
11-25-2006, 04:12 AM
#7
ur gonna nned 99-00 blower al the crap under the dash for it nd do some rewiring.
herse a write up on how to put in a 99-00 into a 96-98 should give u some idea https://honda-tech.com/zerothread?id=605432
why wont u just buy a real ctr so much easier then tryin make one look like it nd probly gona cost u more to make it look like one.
Modified by boosted-K24-EK at 5:24 AM 11/25/2006
herse a write up on how to put in a 99-00 into a 96-98 should give u some idea https://honda-tech.com/zerothread?id=605432
why wont u just buy a real ctr so much easier then tryin make one look like it nd probly gona cost u more to make it look like one.
Modified by boosted-K24-EK at 5:24 AM 11/25/2006
Trending Topics
11-25-2006, 01:15 PM
#10
Honda-Tech Member
Join Date: Dec 2004
Location: California/New Zealand, USA
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
Re: (MugenManR)
Forget the dream of cloning a factory car. It's pointless - been done a 1000 times already - and it really doesn't say much about car modification.
11-25-2006, 03:55 PM
#12
HT White Ops
iTrader: (1)
Join Date: Mar 2006
Location: I see what you did there.
Posts: 16,222
Likes: 0
Received 3 Likes
on
3 Posts
Re: (Type Ek)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Type Ek »</TD></TR><TR><TD CLASS="quote">Could that 96-98 dash fit into a 99-00 with some custom wiring?</TD></TR></TABLE>
Yes.
Yes.
11-25-2006, 05:29 PM
#13
HT White Ops
iTrader: (1)
Join Date: Mar 2006
Location: I see what you did there.
Posts: 16,222
Likes: 0
Received 3 Likes
on
3 Posts
Re: (mrjdm1320)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mrjdm1320 »</TD></TR><TR><TD CLASS="quote">........</TD></TR></TABLE>
Post *****.
Post *****.
Thread
Thread Starter
Forum
Replies
Last Post
SLowDB
Northwest (Sales)
0
09-02-2010 06:50 PM
BrandonClaps
For Sale
14
03-11-2006 05:46 PM