My Build Thread...
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: Lakewood, California, USA
Posts: 923
Likes: 0
Received 0 Likes
on
0 Posts
My Build Thread...
First, off let me introduce myself... I'm a Toyota guy, I'm a moderator over in ToyotaNation.com and an Admin over in EchoDrivers.com ... I use to own a couple of Toyotas... I'm known around the toyota boards as Wraith. I'm the one that road raced a 6Spd/Blitz Supercharged Toyota Echo and was build a pretty sick 2.1Liter 5S-GTE Camry... So if any of you guys would like help on Toyota stuff ... I'll be more than gadly offer my advice on Toyota stuff because I'll need to catch up on the Honda stuff...
Because I havent touched a Honda since 1992, so I have alot of catching up to do ... But, Heres my new piece of $#!T beater ... I bought the car from bleakdragonmage... This is how the looked when I picked it up...
This was 10 days after I picked her up ...
heres the progression on 20th day ...
Just an Update on my progression !!!
well here my final setup for my Killer BTec set up I'm building currently and should be in and dyno tuned by end of JUNE...
B16 Head:
-Light Port and polish
-5 angle valve job
-SuperTech Titanium Valves ( stock size)
-SuperTech Titanium Dual Valve Springs
-SuperTech Titanium retainers
-SuperTech Viton Valve seals
-Brian Crower Stage 3
-Golden Eagle cam gears
-Skunk 2 Pro Series Manifold (port mached to tb and lite porting of runners)
-AEBS 70mm TB
-JGE/BP Big Tube Race 4-2-1 Header
-Hondata IM heatshield
-310cc Injectors
-B&M FPR
-Apexi Spark plug wires
-AEM Short Ram filter
B20 Block:
-b20 Block (cleaned and honed)
-Golden Eagle Block Guard
-b20 Crank
-Arias Pistons with rings (12:1 compression)
-Eagle Rods w/ARP rod bolts
-Honda Rod Bearings and Main Bearings
-Golden Eagle Vtec conversion kit (84mm)
-Golden Eagle Head Bolts
-Type R Oil Pump
-Type R Water pump
-Moroso Oil Pan
running a 190lph fuel pump and a Custom 2.5" Vibrant/Moroso exhaust system... Going to be tuned on a Hondatat S200 P28 w/ a Zeitronix Wide Band.
I hope to make about 200 to 260whp
Got a few better pics ...
I'll post how she comes out when I get her tuned...
heres a few pic of my past Toyota Collection:
My Echo aka the Kaka-Roach:
My 1972 MINT Condition Celica aka Sweetness:
My Camry aka TheWraith aka TheMoneyPit:
Modified by RippSpeed at 7:48 PM 6/5/2007
Modified by RippSpeed at 7:50 PM 6/5/2007
Because I havent touched a Honda since 1992, so I have alot of catching up to do ... But, Heres my new piece of $#!T beater ... I bought the car from bleakdragonmage... This is how the looked when I picked it up...
This was 10 days after I picked her up ...
heres the progression on 20th day ...
Just an Update on my progression !!!
well here my final setup for my Killer BTec set up I'm building currently and should be in and dyno tuned by end of JUNE...
B16 Head:
-Light Port and polish
-5 angle valve job
-SuperTech Titanium Valves ( stock size)
-SuperTech Titanium Dual Valve Springs
-SuperTech Titanium retainers
-SuperTech Viton Valve seals
-Brian Crower Stage 3
-Golden Eagle cam gears
-Skunk 2 Pro Series Manifold (port mached to tb and lite porting of runners)
-AEBS 70mm TB
-JGE/BP Big Tube Race 4-2-1 Header
-Hondata IM heatshield
-310cc Injectors
-B&M FPR
-Apexi Spark plug wires
-AEM Short Ram filter
B20 Block:
-b20 Block (cleaned and honed)
-Golden Eagle Block Guard
-b20 Crank
-Arias Pistons with rings (12:1 compression)
-Eagle Rods w/ARP rod bolts
-Honda Rod Bearings and Main Bearings
-Golden Eagle Vtec conversion kit (84mm)
-Golden Eagle Head Bolts
-Type R Oil Pump
-Type R Water pump
-Moroso Oil Pan
running a 190lph fuel pump and a Custom 2.5" Vibrant/Moroso exhaust system... Going to be tuned on a Hondatat S200 P28 w/ a Zeitronix Wide Band.
I hope to make about 200 to 260whp
Got a few better pics ...
I'll post how she comes out when I get her tuned...
heres a few pic of my past Toyota Collection:
My Echo aka the Kaka-Roach:
My 1972 MINT Condition Celica aka Sweetness:
My Camry aka TheWraith aka TheMoneyPit:
Modified by RippSpeed at 7:48 PM 6/5/2007
Modified by RippSpeed at 7:50 PM 6/5/2007
#3
Junior Member
Re: (pdiggitydogg)
hey whats the deal? this thread is no different than a DIY motor swap thread so why do you have to report? hes starting with something, tearing it down, rebuilding it and and coming out with something that is better than when he started. dont act like you own this website, DOG!! to the op, nice car. looks real sharp and clean. keep up the awesome work!!
#4
Honda-Tech Member
Join Date: Apr 2003
Location: PinaColadaBurgh, Id, USA
Posts: 1,877
Likes: 0
Received 1 Like
on
1 Post
Re: (jdmracer12)
10139 posts [100%]
Beware Of Perverts
2-2-2003
42 posts [100%]
Gillett pa
3-3-2007
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmracer12 »</TD></TR><TR><TD CLASS="quote">dont act like you own this website, DOG!!</TD></TR></TABLE>
pdiggity will own you. There's no actual tech involved and it's really nothing more than an introduction and a display of pics. His statement is valid and he has way more sway than you, chief. Respect.
Beware Of Perverts
2-2-2003
42 posts [100%]
Gillett pa
3-3-2007
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmracer12 »</TD></TR><TR><TD CLASS="quote">dont act like you own this website, DOG!!</TD></TR></TABLE>
pdiggity will own you. There's no actual tech involved and it's really nothing more than an introduction and a display of pics. His statement is valid and he has way more sway than you, chief. Respect.
#5
Honda-Tech Member
Join Date: Jan 2007
Location: ND, USA
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Re: (jdmracer12)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmracer12 »</TD></TR><TR><TD CLASS="quote">hey whats the deal? this thread is no different than a DIY motor swap thread so why do you have to report? hes starting with something, tearing it down, rebuilding it and and coming out with something that is better than when he started. dont act like you own this website, DOG!! to the op, nice car. looks real sharp and clean. keep up the awesome work!!</TD></TR></TABLE>
Agreed. People report way too many threads.
Very nice car btw. GL on the build.
Agreed. People report way too many threads.
Very nice car btw. GL on the build.
#6
Honda-Tech Member
this is a tech forum, not a show-off-your-ride forum
I read the post, and will sum it up:
Here is my car
This is what Ive done to it
This is what I want to make, power-wise
Was there any:
Here's how I did ___
Tip for installing ___
DIY for ___
Did you know ___
????
Nope.
There is nothing wrong with this thread...its just in the wrong place.
How is reporting something thats in the wrong place acting like I own the place? I follow the rules and I expect others to do the same.
Sorry if that puts sand in your vagina.
I read the post, and will sum it up:
Here is my car
This is what Ive done to it
This is what I want to make, power-wise
Was there any:
Here's how I did ___
Tip for installing ___
DIY for ___
Did you know ___
????
Nope.
There is nothing wrong with this thread...its just in the wrong place.
How is reporting something thats in the wrong place acting like I own the place? I follow the rules and I expect others to do the same.
Sorry if that puts sand in your vagina.
#7
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: Lakewood, California, USA
Posts: 923
Likes: 0
Received 0 Likes
on
0 Posts
hey hey ... I messed up on posting in the wrong place... but dont argue, I accept the fault on posting... Just didnt know where to post it ...
Trending Topics
#8
Honda-Tech Member
iTrader: (1)
Join Date: Feb 2007
Location: Snohomish County, WA
Posts: 3,683
Likes: 0
Received 0 Likes
on
0 Posts
Re: (pdiggitydogg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pdiggitydogg »</TD></TR><TR><TD CLASS="quote">this is a tech forum, not a show-off-your-ride forum
I read the post, and will sum it up:
Here is my car
This is what Ive done to it
This is what I want to make, power-wise
Was there any:
Here's how I did ___
Tip for installing ___
DIY for ___
Did you know ___
????
Nope.
There is nothing wrong with this thread...its just in the wrong place.
How is reporting something thats in the wrong place acting like I own the place? I follow the rules and I expect others to do the same.
Sorry if that puts sand in your vagina.
</TD></TR></TABLE>
ROAR!
I read the post, and will sum it up:
Here is my car
This is what Ive done to it
This is what I want to make, power-wise
Was there any:
Here's how I did ___
Tip for installing ___
DIY for ___
Did you know ___
????
Nope.
There is nothing wrong with this thread...its just in the wrong place.
How is reporting something thats in the wrong place acting like I own the place? I follow the rules and I expect others to do the same.
Sorry if that puts sand in your vagina.
</TD></TR></TABLE>
ROAR!
#10
Re: (Team RS2)
corona????? im in temecula, and i pass coron on the way to school, awesome i like the increase of 951 tuners around here makes it easier to get parts ie for sale is littered with san diego, orange county, and la tuners and makes it hard as hell to get good deals on parts
Thread
Thread Starter
Forum
Replies
Last Post
Johnny Mayday
Honda-Tech News
14
02-08-2017 05:41 AM