motor question
#1
Honda-Tech Member
Thread Starter
Join Date: May 2013
Location: San Diego
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
motor question
I want to build an Ls/vtec motor in the future for my EK, and someone on craigslist is selling a used B18b1 longblock, what are the main things to check for when buying a used longblock,btw the seller said the engine needs new rings and no rod knock.
#3
Honda-Tech Member
iTrader: (3)
Re: motor question
If you're going to spend the money on building an LS/Vtec, I would replace all the bearings, rings and gaskets regardless. So when it's torn down, you can take the block and crank to a machine shop to have everything checked. Just good practice when building an engine.
I've got a 99 B18B1 with clean Vin, pm me for details.
I've got a 99 B18B1 with clean Vin, pm me for details.
#4
Honda-Tech Member
Thread Starter
Join Date: May 2013
Location: San Diego
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Re: motor question
If you're going to spend the money on building an LS/Vtec, I would replace all the bearings, rings and gaskets regardless. So when it's torn down, you can take the block and crank to a machine shop to have everything checked. Just good practice when building an engine.
I've got a 99 B18B1 with clean Vin, pm me for details.
I've got a 99 B18B1 with clean Vin, pm me for details.
Yeah that was my plans for build
Thread
Thread Starter
Forum
Replies
Last Post
Whitfield Inc.
All Motor / Naturally Aspirated
21
12-31-2005 12:51 PM
Samuels
All Motor / Naturally Aspirated
5
07-24-2005 07:10 AM