The Monster's DD 95 Civic 4door build thread
#1
Honda-Tech Member
Thread Starter
The Monster's DD 95 Civic 4door build thread
So I traded my shitty *** Nissan SER for this 1995 Honda Civic EX sedan. I feel in love the second I laid eyes on it. But it does have it down falls that I need to get fixed..
I have had the car for four months now and I have done a pretty good amount in those four months to also be in high school and doing sports lol.
This is the picture the dude sent me before I bought it.
I came with some decent blades...they curb rash and chips on them tho..and the dumb *** previous owner had 205/50 in the front and 195/60 in the back..and dude said they were brand new lol they had like 25% on the parts that weren't cambered..lol
So the first thing I bought was a roof rack.
Now with it on the car.
Next came a new heart. I was going to get a z6 head and block and give them an oem rebuild. But while searching on craigslist I found a full rebuilt z6 with a trans and documents for 1k. I bought that **** up in a heart beat and installed it in over my spring break.
Before installing I set for a good month.
And finally putting it in
My pups passed the hell out while I'm working.
My girlfriend took this picture while doing I was doing the swap and I just think it's awesome..
I couldn't stand having that fat *** muffler on.. especially when the car is stock lol. So I got a stock muffler and got it welded on. A lot quieter and keeps the pigs off my ***.
You can see in this pic where I had to throw a steely on because the tire stopped holding air.
Finally got new tires and the car finally sets and drives right.
I have had the car for four months now and I have done a pretty good amount in those four months to also be in high school and doing sports lol.
This is the picture the dude sent me before I bought it.
I came with some decent blades...they curb rash and chips on them tho..and the dumb *** previous owner had 205/50 in the front and 195/60 in the back..and dude said they were brand new lol they had like 25% on the parts that weren't cambered..lol
So the first thing I bought was a roof rack.
Now with it on the car.
Next came a new heart. I was going to get a z6 head and block and give them an oem rebuild. But while searching on craigslist I found a full rebuilt z6 with a trans and documents for 1k. I bought that **** up in a heart beat and installed it in over my spring break.
Before installing I set for a good month.
And finally putting it in
My pups passed the hell out while I'm working.
My girlfriend took this picture while doing I was doing the swap and I just think it's awesome..
I couldn't stand having that fat *** muffler on.. especially when the car is stock lol. So I got a stock muffler and got it welded on. A lot quieter and keeps the pigs off my ***.
You can see in this pic where I had to throw a steely on because the tire stopped holding air.
Finally got new tires and the car finally sets and drives right.
#6
Honda-Tech Member
Thread Starter
Re: The Monster's DD 95 Civic 4door build thread
Trending Topics
#9
Honda-Tech Member
Thread Starter
Re: The Monster's DD 95 Civic 4door build thread
So I am having a set back on the build atm and I'm really pissed off..my crankshaft pulley found a way to back itself out and ****ed of the key, the balancer, and the threads. So now I am trying to figures these out so I can keep this job I just got.
#11
Honda-Tech Member
Thread Starter
Re: The Monster's DD 95 Civic 4door build thread
Well the shop that rebuilt the engine is fixing the crank under warranty. But now I have to take the damn engine back out and bring it to them.
#12
Honda-Tech Member
Join Date: Feb 2011
Location: Morgnafield, KY
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
Re: The Monster's DD 95 Civic 4door build thread
Good luck with it man.. i got a 93 LX sedan with the z6. luckily i haven't had to pull the motor yet... but i do have a manual tranny waiting for my 220k mile auto to die
#13
Honda-Tech Member
Thread Starter
Re: The Monster's DD 95 Civic 4door build thread
Okay so I'm back to square one..
And this boys and girls is why we don't use ****ing wood screws to put a damn lip on..I swear previous owners are ****ing idiots..
And this boys and girls is why we don't use ****ing wood screws to put a damn lip on..I swear previous owners are ****ing idiots..
#14
Honda-Tech Member
Thread Starter
Re: The Monster's DD 95 Civic 4door build thread
Alright so everyone bare with me..Now the car has a b7 in it..
I bought the b7 for $400 it came with transmission, starter, alternator, etc...all is was missing with the A/C compressor. The harness was still on also just unclipped for the 5 plugs that lead into the car which made me very HAPPY
My plans now are to daily this b7 and just get the car looking nice and hopefully when I get the z6 back from the shop I can shell it and made start building a really aggressive engine.
__________________
I bought the b7 for $400 it came with transmission, starter, alternator, etc...all is was missing with the A/C compressor. The harness was still on also just unclipped for the 5 plugs that lead into the car which made me very HAPPY
My plans now are to daily this b7 and just get the car looking nice and hopefully when I get the z6 back from the shop I can shell it and made start building a really aggressive engine.
__________________
#15
Honda-Tech Member
Thread Starter
Re: The Monster's DD 95 Civic 4door build thread
So today I felt like doing some work to my car. I went out and got some 400-2000 sand paper, some shop rags, and mothers polisher. Now hopefully I can make those blades look a little bit nicer..
I started with the face of it with the 400, then I started to into the inside of the blades and I found some spots of pink paint from previous owner. So I had to make another trip to the store and get 200 grit paper.
Oh and there is paint in the lug holes that I can't get out to save my life...any ideas on that?
The right side I did with the 400 grit but still needs a little bit more. I need a pad or something to get some of the corners.
I started with the face of it with the 400, then I started to into the inside of the blades and I found some spots of pink paint from previous owner. So I had to make another trip to the store and get 200 grit paper.
Oh and there is paint in the lug holes that I can't get out to save my life...any ideas on that?
The right side I did with the 400 grit but still needs a little bit more. I need a pad or something to get some of the corners.
#16
Honda-Tech Member
Re: The Monster's DD 95 Civic 4door build thread
why do you have calif tags up front and tenn tags out back? LOL
and for the lug nut holes....go to a hardware store and get wire wheels that attach to a drill. the make em small enough to fit in the hole, just go slow and it'll clean em up
and for the lug nut holes....go to a hardware store and get wire wheels that attach to a drill. the make em small enough to fit in the hole, just go slow and it'll clean em up
#17
Honda-Tech Member
Thread Starter
Re: The Monster's DD 95 Civic 4door build thread
Okay I might try that, depending on the price of the attachment. I just want to get these things looking good you know
Thread
Thread Starter
Forum
Replies
Last Post
kingpen
Honda Civic / Del Sol (1992 - 2000)
8
12-29-2002 09:26 AM