Making a OBD0-OBD1 conversion harness. Soldering Help!!!
03-25-2006, 04:36 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2005
Posts: 1,037
Likes: 0
Received 0 Likes
on
0 Posts
Making a OBD0-OBD1 conversion harness. Soldering Help!!!
I was wondering what kind of soldering gun do i need to solder the wires to the ECU socket? And would the solder stay?
03-25-2006, 08:05 PM
#2
Member
Join Date: Jun 2005
Location: Mount Holly, NJ, USA
Posts: 2,846
Likes: 0
Received 0 Likes
on
0 Posts
I used a 40 watt soldering pen, 7 bucks.
Just crappy solder too.
Just go for it. I made a harness but fucked it up somehow, ended up just wiring right into the car and it started right up cel free. I didn't swap and wires, musta just been too close together and solder dripped or something, *shrug*
Good luck.
Just crappy solder too.
Just go for it. I made a harness but fucked it up somehow, ended up just wiring right into the car and it started right up cel free. I didn't swap and wires, musta just been too close together and solder dripped or something, *shrug*
Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
