ls pistons in a jdm type r block????
04-06-2003, 02:45 PM
#1
Thread Starter
Join Date: Jan 2003
Location: Tustin Ranch, Killa Cali, us
Posts: 796
Likes: 0
Received 0 Likes
on
0 Posts
ls pistons in a jdm type r block????
my friend just got a jdm type r motor....we put it in ........and it had a blown headgasket.....wewent to replace it, but when it removed the head the pistons said pr-4...ls pistons???wtf? well no i kind of think it is a jdm gsr.why would they put those flat ls pistons in there???the cams in it look bigger than stock itr, or ctr!!!turbo bottom, with na top??it makes no sense, we checked for head and block warpage and they were both perfect. it still is burning oil, and it looks like is leaking oil from the new head gasket. the motor was just rebuilt before he got it, cause i could tell the cylinders were just rehoned. has anyone heard of this before....we are so confused....but the car bones out like a champion.it really rips.we did everything right, but it still is losing oil. any help????
04-06-2003, 09:00 PM
#4
Honda-Tech Member
Join Date: Feb 2003
Location: Nowhere Cali, Ca, USA
Posts: 1,693
Likes: 0
Received 0 Likes
on
0 Posts
Re: ls pistons in a jdm type r block???? (Steady)
i think you got ripped man, the car probably does pull hard cuz you're used to a single cam car or whatever, it would pull alot harder if you had the right pistons in there. who rebuilt it, they might have taken your itr pistons and put the pr4 pistons in it. are you sure the rings are seated ok, also why would you blow a head gasket when the motor was just rebuilt?
good luck
[Modified by akumaracer, 6:02 AM 4/7/2003]
good luck
[Modified by akumaracer, 6:02 AM 4/7/2003]
04-06-2003, 11:46 PM
#5
Join Date: Sep 2002
Location: behind the orange curtain, ca, usa
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
Re: ls pistons in a jdm type r block???? (akumaracer)
used to a single cam?!?!?!..not to hate on this guy^ but the only guy driving a single cam that hangs out is 17 and is getting **** soon....any ways, the guy that got the JDM type LS used to have an H22 if i remember corectly....so a 1.8 ...not as torque if im not a retard...anyways...enough ****....i say sell it on ebay and but one from password or JHP
04-07-2003, 04:49 AM
#6
Former Moderator
Re: ls pistons in a jdm type r block???? (thelonleycrowdedwest)
but the only guy driving a single cam that hangs out is 17 and is getting **** soon
What do you drive that entitles you to say such ignorant remarks?
I'm building a SOHC. I'm 24 and I'm building a SOHC non-VTEC motor - what do you have to say about that?
I can't wait for this one...round one!
DING! DING!
04-07-2003, 04:53 AM
#7
Honda-Tech Member
Join Date: Nov 2000
Posts: 561
Likes: 0
Received 0 Likes
on
0 Posts
Re: ls pistons in a jdm type r block???? (thelonleycrowdedwest)
used to a single cam?!?!?!..not to hate on this guy^ but the only guy driving a single cam that hangs out is 17 and is getting **** soon....any ways, the guy that got the JDM type LS used to have an H22 if i remember corectly....so a 1.8 ...not as torque if im not a retard...anyways...enough ****....i say sell it on ebay and but one from password or JHP
Trending Topics
04-07-2003, 04:58 AM
#8
Honda-Tech Member
Join Date: Apr 2002
Location: Greer, SC, USA
Posts: 2,126
Likes: 0
Received 0 Likes
on
0 Posts
Re: ls pistons in a jdm type r block???? (B18C5-EH2)
What do you drive that entitles you to say such ignorant remarks?
04-07-2003, 05:04 AM
#9
Former Moderator
Re: ls pistons in a jdm type r block???? (BigZ88)
What do you drive that entitles you to say such ignorant remarks?
I believed that may well be summed up with his post count!
I believed that may well be summed up with his post count!
04-07-2003, 05:20 AM
#10
Honda-Tech Member
Join Date: Apr 2002
Location: Greer, SC, USA
Posts: 2,126
Likes: 0
Received 0 Likes
on
0 Posts
Re: ls pistons in a jdm type r block???? (B18C5-EH2)
What do you drive that entitles you to say such ignorant remarks?
I believed that may well be summed up with his post count!
...but he's been here for 199 days. either he reads a lot and doesn't post, or he just pops in on rare ocaasion to spout off useless BS.
I believed that may well be summed up with his post count!
...but he's been here for 199 days. either he reads a lot and doesn't post, or he just pops in on rare ocaasion to spout off useless BS.
04-07-2003, 07:35 AM
#11
Member
Join Date: Dec 2002
Location: cary, il, usa
Posts: 1,003
Likes: 0
Received 0 Likes
on
0 Posts
Re: ls pistons in a jdm type r block???? (B18C5-EH2)
but the only guy driving a single cam that hangs out is 17 and is getting **** soon
What the hell did you just say?
What do you drive that entitles you to say such ignorant remarks?
I'm building a SOHC. I'm 24 and I'm building a SOHC non-VTEC motor - what do you have to say about that?
I can't wait for this one...round one!
DING! DING!
What the hell did you just say?
What do you drive that entitles you to say such ignorant remarks?
I'm building a SOHC. I'm 24 and I'm building a SOHC non-VTEC motor - what do you have to say about that?
I can't wait for this one...round one!
DING! DING!
04-07-2003, 07:37 AM
#12
Member
Join Date: Dec 2002
Location: cary, il, usa
Posts: 1,003
Likes: 0
Received 0 Likes
on
0 Posts
Re: ls pistons in a jdm type r block???? (nasi)
as for the type r block you probably got rip or for some reason they where trying to lower the compression for fi but i don't know sound pretty fishy
04-07-2003, 05:44 PM
#13
Join Date: Sep 2002
Location: behind the orange curtain, ca, usa
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
Re: ls pistons in a jdm type r block???? (JSPECEX)
so basically i was saying the only guy that drives a SOHC that H A N G S O U T ...i hang out with theses guys my motor is at the thread starteers houe retards....read then reply...i hang out with them, and the guy that drives the single cam is 17....not that you cant drive a single cam if your older.....i said that because its true...i may talk **** but its all the truth
04-07-2003, 09:29 PM
#15
Former Moderator
Re: ls pistons in a jdm type r block???? (thelonleycrowdedwest)
so basically i was saying the only guy that drives a SOHC that H A N G S O U T ...i hang out with theses guys my motor is at the thread starteers houe retards....read then reply...i hang out with them, and the guy that drives the single cam is 17....not that you cant drive a single cam if your older.....i said that because its true...i may talk **** but its all the truth
I don't care if you hang out with them. Your post equates SOHC motors with a 17 year old kid that is waiting to"upgrade" so again my original post stands.
04-07-2003, 09:44 PM
#18
Thread Starter
Join Date: Jan 2003
Location: Tustin Ranch, Killa Cali, us
Posts: 796
Likes: 0
Received 0 Likes
on
0 Posts
Re: ls pistons in a jdm type r block???? (B18C5-EH2)
so basically i was saying the only guy that drives a SOHC that H A N G S O U T ...i hang out with theses guys my motor is at the thread starteers houe retards....read then reply...i hang out with them, and the guy that drives the single cam is 17....not that you cant drive a single cam if your older.....i said that because its true...i may talk **** but its all the truth
Your original post still sounds retarded, and your second attempt at creating complere thoughts in type wasn't too good either.
I don't care if you hang out with them. Your post equates SOHC motors with a 17 year old kid that is waiting to"upgrade" so again my original post stands.
Your original post still sounds retarded, and your second attempt at creating complere thoughts in type wasn't too good either.
I don't care if you hang out with them. Your post equates SOHC motors with a 17 year old kid that is waiting to"upgrade" so again my original post stands.
so back to the thread..........i have no clue..we can not figure it out. i think the valve seals are gone. but we know the motor was just rebuilt. the doctor will be putting ctr pistons in it pretty soon, so i guess we got a bunk motor!!!!but it still bones out!
04-07-2003, 10:07 PM
#19
Risky Business
Join Date: Jul 2002
Location: Trackside with the smoking bee
Posts: 25,211
Likes: 0
Received 47 Likes
on
39 Posts
Re: ls pistons in a jdm type r block???? (nasi)
I 
My SOHC...sorry tom
But yeah...it sounds like the previous dude yanked his pistons out and put some crappy LS ones in
My SOHC...sorry tom But yeah...it sounds like the previous dude yanked his pistons out and put some crappy LS ones in
04-09-2003, 02:29 AM
#20
Join Date: Sep 2002
Location: behind the orange curtain, ca, usa
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
Re: ls pistons in a jdm type r block???? (BauleyCivic)
dude, i was saying that you thought that MY FRIEND was used to a single cam...i was saying he wasnt, has only one single cam to ride around in....i dont care how old you are, if single cams are what your in to, more power to you...i dont hate unless you feel the need to get retarded.....so your orignal, and second post are ******* ghey....i wasnt dissing anyone thanks for you time and i hope your not as lame to everyone else that you dont understand.....sorry scott for talking so much **** when your trying to figure stuff out....get my clutch finished!!!! jkjk
Thread
Thread Starter
Forum
Replies
Last Post
Ruby Civic
Tech / Misc
6
07-28-2002 03:40 PM
