CeeJayy

so i can get a bare ls block for 60 bucks that has a chip on one sleeve. my plans are to bore it out 83 or 84mm then re sleeve it and use it for boost and what not any ways.. wo would it be a good deal and work? also my original plans were to build this setup on a gsr block but i mean if i can get a ls block for this cheap should i jump on it?
pic of the chip.

doood

iTrader: (1)

if the rest of the block is in ok shape jump on that deal. you're gonna have to resleeve anyway with anything more than a 81.5mm bore.

pdiggitydogg

thats not going to really hurt anything
have it decked, when you have the machine work done

Im selling my spare LS block for a similar price (except mine comes with a head...so its 125 )

99_EM_one

bump

CeeJayy

ttt

kuja396

If your going to resleeve it then it doesnt matter.. That is a chip on the sleeve lol. I really dont think its gonan matter a whole lot if you plan on keeping the stock sleeves either.

NJcoupe

that chip will not alter anything; its part of the sleeve; correct. But its part of the water jacket; which does not alter anything.

turbociviccoupe

chip wouldnt matter

0Golden Eagle

that is no big deal chip is not that bad and just to let you know if you plan on sleeving it we sell ls sleeved blocks for 950.00 shipped

VRD^sam

like the other guys said. if your gonna resleeve that block you wouldn't have to worry about that chip....