lower main question....
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2005
Location: does it matter.....
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
lower main question....
i just got my pistons/rod's back from the machine shop a few min. ago, they were cleaned and look new. but my question is should i have my lower mains honed/cleaned or will i be fine,also the previous owner spun a bearing on this block,but i have had everything machined/cleaned except for the lower mains. will they be fine or should i take them to the machine shop also. thanks. the only thing i'm waiting for is my rings,and my bearings to come from earl!
Modified by Jus_B at 5:56 PM 10/14/2005
Modified by Jus_B at 5:56 PM 10/14/2005
Thread
Thread Starter
Forum
Replies
Last Post