Looking for OBD1 USDM P30 Knock board pic
08-30-2007, 06:19 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2005
Location: Nova Scotia, Canada
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Looking for OBD1 USDM P30 Knock board pic
Hey guys,
I'm looking for a pic of a OBD1 USDM P30 knock board.
If you have one and can take a pic I'd really appreciate it.
Or atleast tell me which resistors exist in the R11 through R16 part of the board.
I'm taking the knock board out of my old non-working JDM P30 and installing it in a P06 with vtec added to run P30 code. I know when adding it for use with P72 code resistors have to be present at R11 and R15 instead of the R12 and R15 they are found at on JDM P30 ECUs. I just want to know if its the same for all USDM knock boards.
Thanks!
Modified by mik101 at 3:37 AM 8/31/2007
I'm looking for a pic of a OBD1 USDM P30 knock board.
If you have one and can take a pic I'd really appreciate it.
Or atleast tell me which resistors exist in the R11 through R16 part of the board.
I'm taking the knock board out of my old non-working JDM P30 and installing it in a P06 with vtec added to run P30 code. I know when adding it for use with P72 code resistors have to be present at R11 and R15 instead of the R12 and R15 they are found at on JDM P30 ECUs. I just want to know if its the same for all USDM knock boards.
Thanks!
Modified by mik101 at 3:37 AM 8/31/2007
09-03-2007, 02:16 PM
#4
Honda-Tech Member
Thread Starter
Join Date: Aug 2005
Location: Nova Scotia, Canada
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Re: (mik101)
If someone would take the 5 minutes to open up their USDM P30 and take a pic I'd appreciate it.... Come on guys, 9 screws....
Thread
Thread Starter
Forum
Replies
Last Post
zammitjon
All Motor / Naturally Aspirated
7
08-24-2009 08:58 PM
