Lookin for some suggestions
#1
Lookin for some suggestions
I have an ls/vtec motor and I need some suggestions on what to do to get more power. mods are as follows.
- b16 head milled
- ctr pistons
- itr cams
- rc 350cc injectors
- aem cam gears
- itr exhaust manifold
- skunk2 cat back exhaust
- b16 intake manifold
- neptuned
I am already planning on doing more aggressive cams and an intake manifold and tb but what else is there to do to make some real power gains. Thanks in advance for your input.
- b16 head milled
- ctr pistons
- itr cams
- rc 350cc injectors
- aem cam gears
- itr exhaust manifold
- skunk2 cat back exhaust
- b16 intake manifold
- neptuned
I am already planning on doing more aggressive cams and an intake manifold and tb but what else is there to do to make some real power gains. Thanks in advance for your input.
#5
Honda-Tech Member
Join Date: Jan 2005
Location: Lower Right Hand Corner, PA
Posts: 5,643
Likes: 0
Received 0 Likes
on
0 Posts
Re: (NA EJ8)
Spend money on a good header. New rods/bearings, PnP the head with more aggressive cams valves/retainers/springs/valveguides/etc and rev the hell out of it.
I believe there was a B16 sol that was revving to 11K a while ago?
I believe there was a B16 sol that was revving to 11K a while ago?
Trending Topics
#8
Re: Lookin for some suggestions (NA EJ8)
get a cold air and build somthing underneath it so it does not suck up water. cold air is undeniably better than a short ram.
i would suggest turbo for real power gains.
i would suggest turbo for real power gains.
#13
Re: Lookin for some suggestions (PRcivicHB)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PRcivicHB »</TD></TR><TR><TD CLASS="quote">ITBs???</TD></TR></TABLE>
gonna do it but stock for now
gonna do it but stock for now
#14
Honda-Tech Member
Join Date: Mar 2004
Location: Iowa
Posts: 3,529
Likes: 0
Received 0 Likes
on
0 Posts
Re: Lookin for some suggestions (NA EJ8)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SovXietday »</TD></TR><TR><TD CLASS="quote">Spend money on a good header. New rods/bearings, PnP the head with more aggressive cams valves/retainers/springs/valveguides/etc and rev the hell out of it.
I believe there was a B16 sol that was revving to 11K a while ago?</TD></TR></TABLE>
x2
I believe there was a B16 sol that was revving to 11K a while ago?</TD></TR></TABLE>
x2
#20
Re: Lookin for some suggestions (PRcivicHB)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PRcivicHB »</TD></TR><TR><TD CLASS="quote">a race header... them weird looking ones... what they are called</TD></TR></TABLE>
?
?
#21
Carpe diem!
Join Date: Jun 2006
Location: STOP ghetto time, Arizona, US
Posts: 2,469
Likes: 0
Received 0 Likes
on
0 Posts
#23
New User
Join Date: Nov 2005
Location: stafford, va, united states
Posts: 1,203
Likes: 0
Received 0 Likes
on
0 Posts
Re: Lookin for some suggestions (PRcivicHB)
Oh mna no stay way from a DC sports header if your looking for the most power from a header.
For real, DC sports is crap and a baseline header. Look into getting a RMF narrow header/
Click this one for a Header test. Shows power gains..
https://honda-tech.com/zerothread?id=1538831
Chick this to see what it looks like. Pretty bad *** header.
https://honda-tech.com/zerothread?id=1520388
For real, DC sports is crap and a baseline header. Look into getting a RMF narrow header/
Click this one for a Header test. Shows power gains..
https://honda-tech.com/zerothread?id=1538831
Chick this to see what it looks like. Pretty bad *** header.
https://honda-tech.com/zerothread?id=1520388
Thread
Thread Starter
Forum
Replies
Last Post