k20a3
10-20-2008, 09:06 PM
#1
Thread Starter
Join Date: Apr 2008
Location: Melbourne, Florida, Brevard
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
k20a3
Just scooped up a k20a3 motor (no tranny). Was wondering how hard it'll be to pick up an a2 head and tranny to make this thing have a little more *****. Also wanted to know what all will I need to install this into my eg. I just wana get a list goin so I get everything together and it all goes smooth when the swap takes place. all opinions are welcome and all suggestions are appreciated.
p.s. I'm in no rush with the swap. I want everything to be 100% before I put it in my car.
p.s. I'm in no rush with the swap. I want everything to be 100% before I put it in my car.
10-20-2008, 09:29 PM
#3
Thread Starter
Join Date: Apr 2008
Location: Melbourne, Florida, Brevard
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Re: (ekb16)
Yeah I know of that site. Figured id ask here because I'm a little more familiar with this site and I have a few friends that chill on here all day.
But for the most part I know what I need to do, id just rather hear some suggestions I might not think of.
But for the most part I know what I need to do, id just rather hear some suggestions I might not think of.
10-21-2008, 12:13 AM
#4
B*a*n*n*e*d
Join Date: May 2008
Location: ca
Posts: 849
Likes: 0
Received 0 Likes
on
0 Posts
Re: k20a3 (SleazyP.Martini)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SleazyP.Martini »</TD></TR><TR><TD CLASS="quote">Just scooped up a k20a3 motor (no tranny). Was wondering how hard it'll be to pick up an a2 head and tranny to make this thing have a little more *****. Also wanted to know what all will I need to install this into my eg. I just wana get a list goin so I get everything together and it all goes smooth when the swap takes place. all opinions are welcome and all suggestions are appreciated.
p.s. I'm in no rush with the swap. I want everything to be 100% before I put it in my car.</TD></TR></TABLE>
best bet is to probably flip that and get a k20a2 long block. cheaper than sorcing out all the parts to turn that a3 into an a2
p.s. I'm in no rush with the swap. I want everything to be 100% before I put it in my car.</TD></TR></TABLE>
best bet is to probably flip that and get a k20a2 long block. cheaper than sorcing out all the parts to turn that a3 into an a2
Thread
Thread Starter
Forum
Replies
Last Post
94jrscgsr
Tech / Misc
6
07-17-2004 03:03 PM
sleepyhamsterlx
Honda Civic / Del Sol (1992 - 2000)
11
03-27-2004 12:56 PM