just wondering
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2005
Posts: 507
Likes: 0
Received 0 Likes
on
0 Posts
just wondering
Im have a b16a put in to my 94 dx coupe... I'm changing the motor harnesses right now... my question is...
besides the O2 sensor, what other wires have to be extended?... i know i have to wire up vtec, vtec oil pressure, and knock sensor...
also where is vtec oil pressure and knock sensor located???
besides the O2 sensor, what other wires have to be extended?... i know i have to wire up vtec, vtec oil pressure, and knock sensor...
also where is vtec oil pressure and knock sensor located???
#3
Honda-Tech Member
Re: just wondering (meagainsttheworld)
for the wiring, that's it. i'm not sure about the o2 sensor. i didn't have to deal with that when i did my swap into my 93 dx hatch.
the vtec pressure it right near the solenoid and the knock sensor is near the oil filter.
the vtec pressure it right near the solenoid and the knock sensor is near the oil filter.
#4
Honda-Tech Member
Join Date: Oct 2005
Location: State College, Pa, US
Posts: 2,309
Likes: 0
Received 0 Likes
on
0 Posts
Re: just wondering (philosofy1)
look really hard I think most of the cars 92-95 if built in canada were wired for vtec even if they didn't have it look for the made in Canada sticker on the rad core support(drivers side)
Thread
Thread Starter
Forum
Replies
Last Post
Freeltec
Tech / Misc
12
07-23-2003 05:38 PM
takeheed
Honda CRX / EF Civic (1988 - 1991)
5
09-18-2002 11:27 AM