Just installed my SRR LCA's [add keywords: lower control arms]
11-09-2002, 08:53 PM
#1
Honda-Tech Member
Thread Starter
Just installed my SRR LCA's [add keywords: lower control arms]
They definately are lighter than stock. Not by a whole lot though -- I'd say maybe 10-15% lighter. Didn't have a weight scale to measure exactly though. I concede though, I mostly bought them for the bling 
That's a Cusco lower tie bar there along with an ITR 22mm swaybar and Beaks subframe reinforcement kit. Used Si endlinks. Buddy Club Racing Spec dampeners. The thing handles like it's on rails. Maybe even better than my '93 RX7 did.
[Modified by CheezeFrog, 11:54 PM 11/9/2002]
That's a Cusco lower tie bar there along with an ITR 22mm swaybar and Beaks subframe reinforcement kit. Used Si endlinks. Buddy Club Racing Spec dampeners. The thing handles like it's on rails. Maybe even better than my '93 RX7 did.
[Modified by CheezeFrog, 11:54 PM 11/9/2002]
11-09-2002, 09:04 PM
#2
Join Date: Oct 2002
Location: La Marque, Tx, USA
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just installed my SRR LCA's [add keywords: lower control arms] (CheezeFrog)
Man, thats the shittiest setup Ive seen, I know this one cute asain kid with a black EK with a cool licesnce plate that will **** your car up! I mean, his **** is bling blingin! Word on the street hes got a 1.6 non VTEC with like a 300 shot of naaawzz.
I dunno some people say hes St00pid, like alot of his friends, but hes just cool in my book.
I dunno some people say hes St00pid, like alot of his friends, but hes just cool in my book.
11-09-2002, 09:06 PM
#3
Honda-Tech Member
Thread Starter
Re: Just installed my SRR LCA's [add keywords: lower control arms] (Soulracer)
Pardon Soulracer's language, folks. He's been eating too many retard sandwiches 
11-09-2002, 09:14 PM
#5
Honda-Tech Member
Join Date: Sep 2002
Location: Ellicott City, MD, USA
Posts: 1,318
Likes: 0
Received 1 Like
on
1 Post
Re: Just installed my SRR LCA's [add keywords: lower control arms] (SpoonSportsEH2)
nice!...it is alittle too flashy..eventually after all the comments on the street go out and get some flat black paint and just paint em...TOO shiney almost..how do they perform though?
11-09-2002, 09:17 PM
#7
Join Date: Oct 2002
Location: La Marque, Tx, USA
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just installed my SRR LCA's [add keywords: lower control arms] (Hyjnx)
Cary? Spray paint? LOL you dont know him, hes a class act all the way, he didnt buy those for the "flash" he bought them beacuse of usefullness and I think because they cost a lil bit-o-money and not many people down here pay enough attention to small details like he. Cary?
Trending Topics
11-09-2002, 09:18 PM
#8
Honda-Tech Member
Thread Starter
Re: Just installed my SRR LCA's [add keywords: lower control arms] (Hyjnx)
How do they perform? Hmm.. tough to say right now. I haven't felt a difference, but I haven't really been able to put them through the wringer yet. I've heard that you won't really notice any difference at all unless you're running really high spring rates that might otherwise cause the stock LCA to flex. I'm running 8Kg/mm springs in the back, which isn't all that high. Plus I'm rolling on steelies with like 65 series tires, and it feels like I'm driving a canoe filled with water on stilts. Compared to my Sumitomo HTRZII's anyway.
11-09-2002, 09:19 PM
#9
Honda-Tech Member
Thread Starter
Re: Just installed my SRR LCA's [add keywords: lower control arms] (Soulracer)
Chris, well I did spray paint my Rotas. Because, well... they're Rotas.
11-09-2002, 09:31 PM
#11
Honda-Tech Member
Join Date: Sep 2002
Location: Ellicott City, MD, USA
Posts: 1,318
Likes: 0
Received 1 Like
on
1 Post
Re: Just installed my SRR LCA's [add keywords: lower control arms] (CivicSedan)
MAN!!!...now i have to go change pants and get the cutips for the keyboard..THANKS ALOT!
That is ******* insane! I envy you man.
11-09-2002, 10:06 PM
#13
Honda-Tech Member
Thread Starter
Re: Just installed my SRR LCA's [add keywords: lower control arms] (CivicSedan)
Whoa, that looks almost exactly like my setup... except I have one of these for my tower bar:
I want to get my entire undercarriage clean like they have that subframe assembly.
I want to get my entire undercarriage clean like they have that subframe assembly.
11-10-2002, 02:32 AM
#18
Honda-Tech Member
Join Date: May 2001
Location: Orange County, So Cal
Posts: 1,891
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just installed my SRR LCA's [add keywords: lower control arms] (Unjockable)
yeah i want that camara, those LCAs, those coilovers...
[Modified by Eddie HatchBlack, 3:33 AM 11/10/2002]
[Modified by Eddie HatchBlack, 3:33 AM 11/10/2002]
11-10-2002, 02:58 AM
#20
New User
Join Date: Jul 2001
Location: www.stevedemmitt.com, USA
Posts: 3,736
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just installed my SRR LCA's [add keywords: lower control arms] (iwouldHITit)
sweeet
looking really good
can't way to get a sway bar setup on my hatch
looking really good
can't way to get a sway bar setup on my hatch
11-10-2002, 09:40 AM
#23
Honda-Tech Member
Thread Starter
Re: Just installed my SRR LCA's [add keywords: lower control arms] (chameleon)
No, these LCA's are only available for EK9/EJ6 and DC5/EP3 platforms. The latter being relatively new, so they're even harder to find. The camera used was a Sony DSC-F707.
11-10-2002, 10:09 AM
#24
Honda-Tech Member
Join Date: Jan 2002
Location: thats right, nj
Posts: 1,023
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just installed my SRR LCA's [add keywords: lower control arms] (CheezeFrog)
yo mang tha's dope as hell.... i wish i had the money to have that kind of stuff... 
