Littlegreend15

like the topic says, this is a super nice piece. all stainless, flawless welds, fits like butter, very easy install, sounds as quiet as stock with the silencer, real deep tone without, 350 shipped, you cannot beat that anywhere, if you're in the market for an exhaust, get it, btw its a 94 hatch if you care. only complaint is the mega huge exhaust tip, but i don't care that much. also i installed the megan test pipe, also great. and for all you eco heads, i didn't have the money for a cat, and my car didn't come with one, don't ask me why, it had the stock exhaust but no cat. i will put a real cat on though later because i'll have to have emissions next year

turbo sol

where did you buy it from? what is the diameter? do they make a 2.5" or 3"

Littlegreend15

i got it at http://www.streetrays.com, its 2.5", they make 3" "turbo spec" but i'm not sure if they have them for hondas, the 2.5" is "drift spec", cuz i plan on drifting my fwd car

BauleyCivic

I have the 2.5" N1 muffler from megan, I love it

flood

I have a stainless header from Megan racing. Its decent for what I paid.

Although its too short and I had to pull the stock exhaust forward to meet it and it doesn't fit 100%. But good enough.

Ricey McRicerton

Are the welds stainless as well?

GetawayInMoscow

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ricey McRicerton &raquo;</TD></TR><TR><TD CLASS="quote">Are the welds stainless as well?</TD></TR></TABLE>

Also is the inside diameter or outside diameter 2.5"?

rhdteg18

My brother has a Megan on his 99 prelude and his sounds real nice and the install went flawless. Great exhaust for the money!! I have a greddy evo II but next time i will go Megan better price and sounds just as good. HP differance???

Littlegreend15

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ricey McRicerton &raquo;</TD></TR><TR><TD CLASS="quote">Are the welds stainless as well?</TD></TR></TABLE>

the welds are stainless, they're beautiful too, i'll post some pics up probably tomorrow

Ricey McRicerton

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Littlegreend15 &raquo;</TD></TR><TR><TD CLASS="quote">

the welds are stainless, they're beautiful too, i'll post some pics up probably tomorrow</TD></TR></TABLE>

Awesome. I may buy one of these when my Dunk finally gives up if it holds up well for you.

92BluEH-3

i was lookin at one of those on ebay just didnt know how good they were i guess ill have to invest in one of those

ghettogk

does anyone know if there are megan headers for 99 si's?

TrackSpeedRacing

yes there are tons of them. http://cgi.ebay.com/ebaymotors...33631 JDM 4-1 2.5" Collector Header

lukiasz

Do U have any opinion about Exhaust Header Megan Racing 4-1 to B16a2?

YCT

i agree great stuff

TrackSpeedRacing

for the price you simply cant beat it! i had one on my jdm b18c gsr motor which replaced my banged up DC Sports unit. Would I buy it again? Yes I would, simply for the fact that it lasted me over a year without any cracks or rust! Great product plus it was a true 2.5 inch collector header! If you decide on getting one for your b16a2, just go with the JDM 4-1 version. good luck

Agent STFU

I think its a great product. If you're in the market for an exhaust, check out magnaflow as well. Great product for the price, you can easily find them for under $400 online, I paid about $300 for mine a year or two ago.

to expensive exhaust systems

If I had to do it again, it'd be megan, magnaflow, or custom