JDM ITR Suspension Question....
03-09-2006, 01:07 AM
#3
Thread Starter
Join Date: Feb 2006
Location: Bay Area, CA, USA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Re: JDM ITR Suspension Question.... (RedHBzzz)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlueIntegraBoy »</TD></TR><TR><TD CLASS="quote">Yes, any struts made for the Type-R will of course fit the Type-R rear LCA. There were USDM Type-Rs.
</TD></TR></TABLE>
My mistake. I was told the Rear Lower Control Arms for the JDM ITR were different then the USDM ITR.
</TD></TR></TABLE>
My mistake. I was told the Rear Lower Control Arms for the JDM ITR were different then the USDM ITR.
03-09-2006, 11:15 AM
#4
Re: JDM ITR Suspension Question.... (RedHBzzz)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RedHBzzz »</TD></TR><TR><TD CLASS="quote">
My mistake. I was told the Rear Lower Control Arms for the JDM ITR were different then the USDM ITR. </TD></TR></TABLE>
Same
My mistake. I was told the Rear Lower Control Arms for the JDM ITR were different then the USDM ITR. </TD></TR></TABLE>
Same
Thread
Thread Starter
Forum
Replies
Last Post
aziantegger10
Acura Integra Type-R
6
04-19-2005 06:14 PM