Christianva

i have already search but with no luck. i even have googled, it only brings up rear seats. im looking on how to install the front.

First, i have JDM ITR seats (DC2) with rail. 3 out of 4 fit. i have heard that swapping the inside rail will fix the issue. will this work? or will the seats be crooked?

BlueIntegraBoy

iTrader: (5)

You need EK9 rails

Christianva

when you say ek9 rails, you mean ctr rails correct?

95EG2

swap the inner rail from ur ek stock seats to the ITR seats.. easy to do 20 mins top with seat already removed

BlueIntegraBoy

iTrader: (5)

Yes, and it doesn't have to be OEM. It can be aftermarket such as Bride RO rails.

It doesn't work with Recaros seats.

Lugzilla

Where did you get Recaros from? OP, just swap the inner rail from your stock seats, throw them in the car and call it a day.

Christianva

Well there are some mixed disscuson on how to install dc2 seats into an ek hatch. First ill try the inner rail and if that does not work well looks like im buying some bride ro brackets.

Christianva

I got the seats from jspec auto here in ashland va. They are not in mint conditon but decently clean.

Libertariat

Just buy the bride rails. Get them for your car and make sure they're for a reclining seat. You don't need a side mount seat rail.

Christianva

so where is the best place to buy bride ro rails?

BlueIntegraBoy

iTrader: (5)

I said you can't do this.

OP, don't waste your time with the stock rail swap. These posters don't know what they are talking about.

BlueIntegraBoy

iTrader: (5)

http://www.nengun.com/bride/rails-ro-type

Christianva

just did ordered some from weksauce.org