JDM ITR front end conversion?
#1
Thread Starter
Join Date: Apr 2002
Location: Forest, VA, USA
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
JDM ITR front end conversion?
im looking to get a '96-'00 civic hatch & i want to do the JDM ITR front end conversion also. has anyone done this, if so were there any problems that occured during the install. if anyone has pictures that would also be appreciated. Thanks!!!
#3
Re: JDM ITR front end conversion? (Integra2nr)
have you tried searching?? obviously not.
you will need new radiator support.
need to cut and 50/50 the fenders.
not sure about the hood fitment, should work though.
you will need new radiator support.
need to cut and 50/50 the fenders.
not sure about the hood fitment, should work though.
#5
Thread Starter
Join Date: Apr 2002
Location: Forest, VA, USA
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: JDM ITR front end conversion? (FlamencoEsi)
will somebody please point me in the right direction, im not trying to be stupid or anything, i just asked a question!
#6
Don't Trust Anyone
Join Date: Apr 2002
Location: Las Vegas
Posts: 7,224
Likes: 0
Received 0 Likes
on
0 Posts
Re: JDM ITR front end conversion? (Integra2nr)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Integra2nr »</TD></TR><TR><TD CLASS="quote">will somebody please point me in the right direction, im not trying to be stupid or anything, i just asked a question! </TD></TR></TABLE>
The Door ---------------------------------------------------------------------->
The Door ---------------------------------------------------------------------->
#7
Re: JDM ITR front end conversion? (Integra2nr)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Integra2nr »</TD></TR><TR><TD CLASS="quote">will somebody please point me in the right direction, im not trying to be stupid or anything, i just asked a question! </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CarbonCreations »</TD></TR><TR><TD CLASS="quote">
have you tried searching?? obviously not.
</TD></TR></TABLE>
https://honda-tech.com/zerosearch
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CarbonCreations »</TD></TR><TR><TD CLASS="quote">
have you tried searching?? obviously not.
</TD></TR></TABLE>
https://honda-tech.com/zerosearch
Trending Topics
#8
Honda-Tech Member
Re: JDM ITR front end conversion? (CarbonCreations)
not trying to be rude or anything but im sure you would get ALOT more help if you were in the appearance forum.
#9
Multi-paradigm
Join Date: Nov 2003
Location: San Diego, CA
Posts: 3,476
Likes: 0
Received 0 Likes
on
0 Posts
Re: JDM ITR front end conversion? (CarbonCreations)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CarbonCreations »</TD></TR><TR><TD CLASS="quote">
https://honda-tech.com/zerosearch</TD></TR></TABLE>
https://honda-tech.com/zerosearch</TD></TR></TABLE>
Thread
Thread Starter
Forum
Replies
Last Post
N~FaMouSKhMerBoi
Honda / Acura
40
06-07-2003 11:04 AM