FF DRFT

Since both are supposedly built on the same chassis, I'm wondering if with the radiator support, will the jdm itr headlights, front bumper, and fenders, all bolt up on the eg?

CMCivicSI

I have a friend that put the integra front end on his hatch and he had to cut the fenders so they would match the doors, but everything else bolted on, radiator support was a bolt on to...

AllMotorHB

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CMCivicSI &raquo;</TD></TR><TR><TD CLASS="quote">I have a friend that put the integra front end on his hatch and he had to cut the fenders so they would match the doors, but everything else bolted on, radiator support was a bolt on to...</TD></TR></TABLE>

How is a radiator support ever something you can just bolt on?

Slow_Em1

sure why not

B18C_eg

u can bolt on the radiator support to align it. just put bolts thru where the metal bumper bolts on. u may have to trim some metal away behind the headlight to get them to fit. the fenders will have ot be cut in half and welded together

ekb18cCivic

that comversion looks like SHIOT.. it never fits right .. and it just doesnt look good .. if honda wanted the car to look like that they would put that front end on the car... the fenders always look like **** after being modded... buy a teg then do the conversion

FF DRFT

Honda did put that on their car... it comes on a Honda, not Acura Sorry, but I've seen the conversions on an eg coupe that actually fit right.

Thanks for the info guys.

skip.two

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ekb18cCivic &raquo;</TD></TR><TR><TD CLASS="quote">if honda wanted the car to look like that they would put that front end on the car</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by e1even &raquo;</TD></TR><TR><TD CLASS="quote">Honda did put that on their car... it comes on a Honda, not Acura.</TD></TR></TABLE>
haha he got you there ekb18cCivic

TorganFM.

"if Honda wanted this blah blah blah" is a lame arguement really. If we did everything Honda wanted we would be driving stock cars and buying all parts from Honda dealerships and having oil changes and minor repairs performed by Honda people.

crew08 (girlygirlracer)

does not bolt on but when done right...looks sweet!

Ejay Six

Looks like crap

2K2S2K

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ejay Six &raquo;</TD></TR><TR><TD CLASS="quote">Looks like crap </TD></TR></TABLE>
I agree

cntrdctn

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crew08 &raquo;</TD></TR><TR><TD CLASS="quote">does not bolt on but when done right...looks sweet!



</TD></TR></TABLE>

Street Ghost

Here's another one. I think it looks pretty nice.

Vintech

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ejay Six &raquo;</TD></TR><TR><TD CLASS="quote">Looks like crap </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Schmedone1 &raquo;</TD></TR><TR><TD CLASS="quote">I agree </TD></TR></TABLE>

I think it looks pretty clean (if done right)

egdelrioeg

thats the best exterior mod that can be done a eg..... I would give my left nut to get a front end like that..... but I guess you prefer some altezzas and a apc sticker? haterz are just as bad as thieves for the conversion

Ricey McRicerton

I will remind you guys that this is not a "do you like this" thread. This is a technical thread asking how to do it....

AllMotorHB

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18C_eg &raquo;</TD></TR><TR><TD CLASS="quote">u can bolt on the radiator support to align it. just put bolts thru where the metal bumper bolts on. u may have to trim some metal away behind the headlight to get them to fit. the fenders will have ot be cut in half and welded together</TD></TR></TABLE>

I was always under the impression that a radiator support is something that is welded on and never something that bolts up.

5STAR3

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ejay Six &raquo;</TD></TR><TR><TD CLASS="quote">Looks like crap </TD></TR></TABLE>

looks like a person that has eyes that are WAY to big, i hate that!

99blackcivicSi

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AllMotorHB &raquo;</TD></TR><TR><TD CLASS="quote">

I was always under the impression that a radiator support is something that is welded on and never something that bolts up.</TD></TR></TABLE>

PM Benbuilt4u and ask him the jist of what he did i know the WHOLE top and bottom rad support was cut off and welded in, and the fenders were also cut and rewelded. His car looks very nice and it was done right.

MuFFiN MaN

Looks Great Might Try To Do That Myself Any Idea How Hard It Would Be On a EG Coupe?

TorganFM.

The worst part is mating the ITR fenders to the EG fenders. This requires cutting and welding and shaping (I think on the shaping part).

FF DRFT

I like it with an oem itr bumper. Never liked the CWest on that car. If anyone here does it, write up a DIY or something and take some pics.

drunknbass

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DanW &raquo;</TD></TR><TR><TD CLASS="quote">The worst part is mating the ITR fenders to the EG fenders. This requires cutting and welding and shaping (I think on the shaping part).</TD></TR></TABLE>
i did it.. it was alot more work than i planned on.
fenders are obviosly the hardest part..
rad support needs to be welded.
hood only one hole on each side matches up to the bracket.
i had to cut away the chassis seam on my car under the civic fender so i could allign the itr fender right.
otheer than that i think the teg front end is just too wide for the civic.. seems to look better on coupes

dailydriven

i like it