jdm h22 wont stay started
#1
Junior Member
Thread Starter
Join Date: Jun 2008
Location: Seattle, wa, USA
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
jdm h22 wont stay started
Recenty i decided to do a tune up to my jdm h22, i changed the plugs and changed the distributor only...when i did this i tried to start the car and wouldnt even try to start, I wrote up a few post and someone told me to try a d16yz dist. cap instead of a 90-91 accord cap and to my luck my car started up but it wouldnt stay started it would die and it didnt feel like it had all the power...I have the plugs at 0.40 and wires hooked up at 1-3-4-2. is there any other way to wire a h22? or could it be my coil? if the coil was bad would the car even start? the car started fine before i changed these around, im not sure if the wires are put on the dist. cap the same as they were when i bought the car?? any help would be nice, thanks.
Thread
Thread Starter
Forum
Replies
Last Post