JDM B16A Gen 2 Intake Piping Size
#1
Honda-Tech Member
Thread Starter
JDM B16A Gen 2 Intake Piping Size
Hey everyone. I am currently running an AEM SRI meant for my old D16 but I am running it on a JDM B16. I want to change my setup. I am looking at going to an OEM ITR 3" tube with the CT Engineering Icebox and cone filter. I am concerned the 3" ITR tube might be too large for my stock throttle body (60mm I believe). I looked it up and the ITR throttle body is only 2mm larger (62mm), so I am wondering if the ITR OEM intake tube tapers from 3" at the filter to close to 62mm at the TB end? Can anyone verify this for me?
I have also thought about going to the OEM SIR-II JDM B16A intake tube, but the airbox with that setup is not as free flowing as the OEM ITR one. Plus there is a resonator on the tube with that setup and I just want a straight through tube.
Any thoughts on the OEM ITR + Icebox setup? Thanks!
I have also thought about going to the OEM SIR-II JDM B16A intake tube, but the airbox with that setup is not as free flowing as the OEM ITR one. Plus there is a resonator on the tube with that setup and I just want a straight through tube.
Any thoughts on the OEM ITR + Icebox setup? Thanks!
Thread
Thread Starter
Forum
Replies
Last Post