jdm b16 pro's needed!!!
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2004
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
jdm b16 pro's needed!!!
ok.....i tried searching...so i got 2 questions...1..i have a stock p30 obd1 ecu for my b16...i have i/h/e and thats all im probablly going to do for now..and i have the cel on for i think jdm traction control...and someone told me vtec doesnt work when the cel is on...where in newjersey can i get a p28 ecu chipped for the mods i already have???
and 2..i have the jdm b16 that redlines at 8200....is it bad to b at 4 -4.5rpms on highway driving for about 20-30 min drives?? thanks!!!
also..wen does my v-tec kick in...95 b16
Modified by v8 integra at 5:34 PM 1/25/2007
and 2..i have the jdm b16 that redlines at 8200....is it bad to b at 4 -4.5rpms on highway driving for about 20-30 min drives?? thanks!!!
also..wen does my v-tec kick in...95 b16
Modified by v8 integra at 5:34 PM 1/25/2007
#2
been there done that
iTrader: (1)
Re: jdm b16 pro's needed!!! (v8 integra)
jdm traction control? wtf lol...
first figure out what the cel is for and fix it. you dont need any tuning with simple i/h/e.
those rpm's sound normal for a b16 on the highway. for comparison, my b18c1 is at 4krpm @ 80mph.
first figure out what the cel is for and fix it. you dont need any tuning with simple i/h/e.
those rpm's sound normal for a b16 on the highway. for comparison, my b18c1 is at 4krpm @ 80mph.
#3
Honda-Tech Member
Thread Starter
Join Date: Sep 2004
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
Re: jdm b16 pro's needed!!! (doood)
thats exacttly wat i said wen i looked up the code...so i wont feel any difference from the p30 to the p28 chipped.. i was told i need a new ecu to get rid of the jdm traction control cel....tru?
Modified by v8 integra at 6:41 PM 1/25/2007
Modified by v8 integra at 6:41 PM 1/25/2007
#4
been there done that
iTrader: (1)
Re: jdm b16 pro's needed!!! (v8 integra)
dude, there is no such thing as jdm traction control. there is no traction control period on stock ecu's. jdm, usdm, edm, whatever.
how to correctly pull codes: http://www.c-speedracing.com/faq/06.php
list of codes: http://www.c-speedracing.com/faq/05.php
how to correctly pull codes: http://www.c-speedracing.com/faq/06.php
list of codes: http://www.c-speedracing.com/faq/05.php
#5
Honda-Tech Member
Join Date: May 2006
Location: northshore, MA, USA
Posts: 947
Likes: 0
Received 0 Likes
on
0 Posts
Re: jdm b16 pro's needed!!! (doood)
Agreed there is no trac control. My same setup was at 4500rpm at around 75-80mph and if you really want a chipped p28 for those mods pm me cuz i have one and dont need it since my car got stolen.
Thread
Thread Starter
Forum
Replies
Last Post