jdm 5 lug with d series axle?
09-21-2003, 01:23 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2003
Location: Quezon city, SFDM, Philippines
Posts: 1,382
Likes: 0
Received 0 Likes
on
0 Posts
jdm 5 lug with d series axle?
Anyone know if this is possible? i know my d series axle is 32 mm while the jdm 5 lug usues a 36 mm shaft. can i use an outer cv joint from any other honda model ( accord, prelude,etc) to make this work?
10-02-2003, 12:36 PM
#4
Honda-Tech Member
Join Date: Nov 2002
Location: Augusta, GA
Posts: 1,612
Likes: 0
Received 0 Likes
on
0 Posts
10-02-2003, 12:38 PM
#5
Senior Member
Re: jdm 5 lug with d series axle? (an2ny888)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by an2ny888 »</TD></TR><TR><TD CLASS="quote">Anyone know if this is possible? i know my d series axle is 32 mm while the jdm 5 lug usues a 36 mm shaft. can i use an outer cv joint from any other honda model ( accord, prelude,etc) to make this work?</TD></TR></TABLE>
No, you cannot. Unless you get custom axles for your D series with 36 mm outer CV ends, they will not be compatible.
I would recommend getting US ITR 5 lug or JDM CTR 5 lug hub/knuckles being they are 32mm, and they will go right onto your stock D series axles.
No, you cannot. Unless you get custom axles for your D series with 36 mm outer CV ends, they will not be compatible.
I would recommend getting US ITR 5 lug or JDM CTR 5 lug hub/knuckles being they are 32mm, and they will go right onto your stock D series axles.
10-02-2003, 12:40 PM
#6
Re: jdm 5 lug with d series axle? (poison)
I think for the long run, if you can only find a JDM 5-lug...
Instead of getting custom axles made or frankensteined, just spend a little more money now and get a USDM hub and replace the JDM one. That way you can use standard axles and when your axles go bad, you can still use the pepboys crap.
The hubs are about 140 each online, but you will ruin the bearings pressing the hubs out so new bearings are gonna be 50-70 each as well.
Instead of getting custom axles made or frankensteined, just spend a little more money now and get a USDM hub and replace the JDM one. That way you can use standard axles and when your axles go bad, you can still use the pepboys crap.
The hubs are about 140 each online, but you will ruin the bearings pressing the hubs out so new bearings are gonna be 50-70 each as well.
10-02-2003, 12:43 PM
#7
Honda-Tech Member
Join Date: Feb 2003
Location: GA
Posts: 3,236
Likes: 0
Received 0 Likes
on
0 Posts
Re: jdm 5 lug with d series axle? (tonyXcom)
i underastand why people want this setup but why before a swap?? that boggles me. what good is that increased braking and mad tyte stunna 5 lug if you dont have the power to back it up. im just curious
Thread
Thread Starter
Forum
Replies
Last Post
Mr. Tech
Honda Civic / Del Sol (1992 - 2000)
23
08-17-2006 10:59 AM
jp8900
Tech / Misc
4
11-12-2003 10:27 AM
