ITB"S
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2010
Location: Levittown Pa
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
ITB"S
where can i find a ITB set up for my honda d16Y8?????????????? anyone got a sit that sells them or know where i can possibly purchase this se up
#2
Re: ITB"S
#5
Re: ITB"S
http://www.homemadeturbo.com/tech_projects/itb/
i found this, probably the only way to do it, it will never be a direct bolt on
i found this, probably the only way to do it, it will never be a direct bolt on
#6
Honda-Tech Member
Join Date: Jun 2010
Location: Sunnyside CALI
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Re: ITB"S
whats your full setup again?
ITBs by themselves don't add power. You need high compression and a tune to take advantage of them. They will actually lose power over a stock manifold if just bolted on. juss saying..
ITBs by themselves don't add power. You need high compression and a tune to take advantage of them. They will actually lose power over a stock manifold if just bolted on. juss saying..
#7
Re: ITB"S
I might be willing to part with these if you're interested.
It's the one and only set ever produced by Kinsler. On my delSol:
I put about 1000 miles on them, but this is how they've been sitting for the last 18 months:
Before anyone asks: No, it's never been dyno'd. Ever.
And no, the car has never seen a drag strip.
I'm the original owner, it's just a auto-x toy:
It's the one and only set ever produced by Kinsler. On my delSol:
I put about 1000 miles on them, but this is how they've been sitting for the last 18 months:
Before anyone asks: No, it's never been dyno'd. Ever.
And no, the car has never seen a drag strip.
I'm the original owner, it's just a auto-x toy:
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Jun 2010
Location: Levittown Pa
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Re: ITB"S
I agree with what your saying.. im currently in the middle of my project, I lost my ability to drive for two years and im making this car into a daily driver/track car.... right now i got my cylinder head back from my school's machine shop.. they cleaned it up and re-cut my valves.. was thinking of having the head decked for higher compression? im not sure im still doing my home work.. got any suggestions let me know i plan to do a complete engine and tranny rebuild.
#9
Honda-Tech Member
Thread Starter
Join Date: Jun 2010
Location: Levittown Pa
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
#11
Honda-Tech Member
Thread Starter
Join Date: Jun 2010
Location: Levittown Pa
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Re: ITB"S
I might be willing to part with these if you're interested.
It's the one and only set ever produced by Kinsler. On my delSol:
I put about 1000 miles on them, but this is how they've been sitting for the last 18 months:
Before anyone asks: No, it's never been dyno'd. Ever.
And no, the car has never seen a drag strip.
I'm the original owner, it's just a auto-x toy:
It's the one and only set ever produced by Kinsler. On my delSol:
I put about 1000 miles on them, but this is how they've been sitting for the last 18 months:
Before anyone asks: No, it's never been dyno'd. Ever.
And no, the car has never seen a drag strip.
I'm the original owner, it's just a auto-x toy:
HOW MUCH
Thread
Thread Starter
Forum
Replies
Last Post