boarderkid998

soooooooo... noob me installed a b16b with a obd2b harness into a 96 ek... as we all no THAT DOESNT ****IN WORK( motor starts and runs awesome but nothing in the cluster worked)... soooo i already had a harness for a b16a2 to go into the ek with a obd2a to 2b adapter harness... sooo i plug everything in start it up... wont rev at all.. it idles but realllllllll bogged almost like a mis... wtf could it be ive check back over every single plug and checked every wire color to make sure i was correct... ive tried to use the usdm ecu and the jdm type r ecu...

please give me ne input...

would the vtec oil pressure or the crank sensor not bein hooked up have a negative affect ?

boarderkid998

BUMP