idle???
#1
Member
Thread Starter
Join Date: Apr 2003
Location: pittsburgh, pa, usa
Posts: 1,080
Likes: 0
Received 0 Likes
on
0 Posts
idle???
Just bought a 93 hatch with a built jdm b16, headwork done but no tuning yet (just stage 1)
When i pulled it in my spot last night, I just tapped the gas (1-2.5 rpms) and the needle feel all the way done and almost stalled?????
Any idea why?
When i pulled it in my spot last night, I just tapped the gas (1-2.5 rpms) and the needle feel all the way done and almost stalled?????
Any idea why?
#2
Honda-Tech Member
Re: idle??? (BrownGSR)
first
stage 1 means nothing, im sick and tired of this stage bullshit because stage 1 is something completley different from 1 manufacturer to another. what exactally was done to the head?
and it bogged because it hasnt been tuned.
stage 1 means nothing, im sick and tired of this stage bullshit because stage 1 is something completley different from 1 manufacturer to another. what exactally was done to the head?
and it bogged because it hasnt been tuned.
#3
Member
Thread Starter
Join Date: Apr 2003
Location: pittsburgh, pa, usa
Posts: 1,080
Likes: 0
Received 0 Likes
on
0 Posts
Re: idle??? (Kamin)
crower 401's
crower dual springs
crower ti retainers
skunk 2 gears
milled .020
bronze valve guides
skunk 2 hi comp valves
stock honda headgasket
stock bottom end/p30
crower dual springs
crower ti retainers
skunk 2 gears
milled .020
bronze valve guides
skunk 2 hi comp valves
stock honda headgasket
stock bottom end/p30
#7
Honda-Tech Member
Re: idle??? (BrownGSR)
your playing with fire not tuning it
sure it might be fine, it probably will be fine, but it might also be possibly damaging to the engine.
sure it might be fine, it probably will be fine, but it might also be possibly damaging to the engine.
Thread
Thread Starter
Forum
Replies
Last Post
AlexLude
Honda Prelude
4
03-29-2004 01:35 PM