crazyguy

ever since i finished the B16A SiRII engine swap into my eg hatch.the car had not been running smooth and ran like a disel and no power at all..at first i thought the spark plugs and wires were old.so i replaced them with NGK but still the same problem existed.i have been trying so hard to find out whats wrong with the car for about a week .i rechecked all the wires and there is no CEL.so as i was about to tear down the whole engine and see if the timing was off or i need the piston o rings or new camshaft.i thought maybe the car was miss fired.
so today i went to check on the firing order on the spark plug wires on the distributor cap and guess what. number 1 and number 2 firing system were messed up.i plugged them into the right firing order and guess what. my car starts right up with smotth sound...no more miss firing sound..i was like WTF..and i took it out for the test drive and guess what.
I LOVE B16A engine.
thats all i can say.push all the way to 7200rpm and it pulls really HARD.
the car and the engine is alive.
i was so stupid to check on the most simple things first instead of almost going to tear down the engine.
i am happy.


Modified by crazyguy at 9:39 AM 8/19/2007


Modified by crazyguy at 9:43 AM 8/19/2007


Modified by crazyguy at 9:44 AM 8/19/2007


Modified by crazyguy at 9:50 AM 8/19/2007


Modified by crazyguy at 10:10 AM 8/19/2007

92ehatch

just goes to show you, dont overlook the simplest of things.

congrats man

b16a3delsol

that was pretty dumb but we have all done the same thing before.

Luserkid

Like i tell everyone, only way to learn is by ******* up

highlandparkbigpimpn

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Luserkid &raquo;</TD></TR><TR><TD CLASS="quote">Like i tell everyone, only way to learn is by ******* up </TD></TR></TABLE> i agree but its better when its on some1 else money and car

underb00steg6

iTrader: (2)

yup you really are a crazyguy

wiZCo

Sorry to be a dick, but I would not drive my car if it sounded like a diesel.

Good to know you figured it out though, let it be a lesson to you not to forget your basics.

speedooo

haha i did that once...sounded like a subaru. how come it pushes all the way to 7200? thats pretty low for a b16

vlc92189

b16's can go higher then 7200..

but good job

crazyguy

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vlc92189 &raquo;</TD></TR><TR><TD CLASS="quote">b16's can go higher then 7200..

but good job </TD></TR></TABLE>

yeah it can be pushed at higher rpm.but i only test drove it.
i love it.
and thanks guys

Harryflores

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Luserkid &raquo;</TD></TR><TR><TD CLASS="quote">Like i tell everyone, only way to learn is by ******* up </TD></TR></TABLE>

that's