I need part numbers for my '97 Civic HX
12-12-2002, 12:29 PM
#1
Thread Starter
Join Date: Nov 2002
Location: New Orleans, Louisiana, USA
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
I need part numbers for my '97 Civic HX
My last thread was about my oil-pan, I have that all taken care of.
What I'm in need of now is part numbers for some frame pieces.
My front-left and back-left wheels are bent/twisted.
The front piece is an 'a-arm' or something?
I'm not sure what the names are.
So could someone help me identify the names of these two pieces and the part numbers?
Thanks.
-josh
What I'm in need of now is part numbers for some frame pieces.
My front-left and back-left wheels are bent/twisted.
The front piece is an 'a-arm' or something?
I'm not sure what the names are.
So could someone help me identify the names of these two pieces and the part numbers?
Thanks.
-josh
12-12-2002, 01:21 PM
#2
Honda-Tech Member
Join Date: May 2001
Location: colorado springs, co, usa
Posts: 446
Likes: 0
Received 2 Likes
on
2 Posts
Re: I need part numbers for my '97 Civic HX (sk-8)
josh,
this is a great site for ordering or looking up specific parts for your car: http://www.hondaautomotiveparts.com/
this is a great site for ordering or looking up specific parts for your car: http://www.hondaautomotiveparts.com/
12-12-2002, 04:33 PM
#3
Thread Starter
Join Date: Nov 2002
Location: New Orleans, Louisiana, USA
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Re: I need part numbers for my '97 Civic HX (isotopesope)
I looked through all the stuff listed for my car on that page. I can't seem to find any parts that seem like what I'm looking for. I don't have the money to put my car in the shop and have someone else do it. I'm pretty much on my own with working on my car. I e-mailed http://www.hparts.com about what I was looking for and they havn't contacted me back in 2 days. I just need to know what those pieces are called and their part numbers so I can order them and change them out so my wheels will be straight and not twisted out. Thanks.
-josh
-josh
12-12-2002, 05:28 PM
#5
HT White Ops
Re: I need part numbers for my '97 Civic HX (tominos)
a picture of what you're talking about would help greatly. can u describe your part more?
12-13-2002, 10:35 AM
#7
Thread Starter
Join Date: Nov 2002
Location: New Orleans, Louisiana, USA
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Re: I need part numbers for my '97 Civic HX (BlackDeuceCoupe)
You're right, more or less.
I hydroplaned on an offramp and went over the median at the bottom.
Control Arm, that sounds about right.
I don't have a camera to take pics of it.
On the front, it kinda looks like an 'A'....
I suck at suspension stuff, but I did the engine swap...so I'm not a complete idiot.
I hydroplaned on an offramp and went over the median at the bottom.
Control Arm, that sounds about right.
I don't have a camera to take pics of it.
On the front, it kinda looks like an 'A'....
I suck at suspension stuff, but I did the engine swap...so I'm not a complete idiot.
Trending Topics
12-13-2002, 10:41 AM
#8
Honda-Tech Member
Join Date: May 2001
Location: colorado springs, co, usa
Posts: 446
Likes: 0
Received 2 Likes
on
2 Posts
Re: I need part numbers for my '97 Civic HX (sk-8)
josh,
here are the links on that page for your car and the parts you're probably going to need:
front lower arm:
http://www.hondaautomotiveparts.com/...R+ARM++%281%29
front upper arm:
http://www.hondaautomotiveparts.com/...tcgry5=KNUCKLE
rear lower arm:
http://www.hondaautomotiveparts.com/...REAR+LOWER+ARM
here are the links on that page for your car and the parts you're probably going to need:
front lower arm:
http://www.hondaautomotiveparts.com/...R+ARM++%281%29
front upper arm:
http://www.hondaautomotiveparts.com/...tcgry5=KNUCKLE
rear lower arm:
http://www.hondaautomotiveparts.com/...REAR+LOWER+ARM
Thread
Thread Starter
Forum
Replies
Last Post
