obd1 mani work with obd0 motor
#1
Junior Member
Thread Starter
Join Date: Oct 2007
Location: placerville, ca, us
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
obd1 mani work with obd0 motor
i swaped a obd1 motor in my obd0 integra. its starts with a low idle, no warm up mode or nothing. after warm its got a little idle hunt that you can feel when you cruise.
im thowin a code
i think its cause its the obd1 manifold. i thought it would work staight across besides the dizzy so i just cut the obd0 injector clips off and wired the obd1's up.is there a way to make it work with the obd1 mani. any input would be cool. specifically correct input haha.
im thowin a code
i think its cause its the obd1 manifold. i thought it would work staight across besides the dizzy so i just cut the obd0 injector clips off and wired the obd1's up.is there a way to make it work with the obd1 mani. any input would be cool. specifically correct input haha.
Thread
Thread Starter
Forum
Replies
Last Post