hit rev limit to hard
04-11-2007, 11:59 AM
#1
Thread Starter
Join Date: Apr 2007
Location: perry, ga, usa
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
hit rev limit to hard
ok heres the deal i hit the gas and the tires was wet and hit the rev limit really hard it bogged down for about a mile or 2 then smoked a little and cleared up now have a little tic in the motor.
04-11-2007, 01:50 PM
#3
Thread Starter
Join Date: Apr 2007
Location: perry, ga, usa
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Re: hit rev limit to hard (97Ej6mike)
well i checked the valve springs and set the front at .007 and the back at .008 and i still have a small tic in it i just wanted to see what other people think of it and yes it sounds like its coming from the top end.and its a b16a
im the same one with the idle controll valve problem ive replaced it and i still have the high rev low rev kinda fast for a while then it will stop it not normal.
im the same one with the idle controll valve problem ive replaced it and i still have the high rev low rev kinda fast for a while then it will stop it not normal.
LOL Yes, V-TECH is a must have
04-11-2007, 02:27 PM
#6
Honda-Tech Member
Join Date: Jul 2006
Location: Ohio, Us
Posts: 2,541
Likes: 0
Received 0 Likes
on
0 Posts
Re: (EH2typeR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EH2typeR »</TD></TR><TR><TD CLASS="quote">i think you hit v-tech too hard.
its a common problem when you hit v-tech too hard. dont worry about it. no biggie</TD></TR></TABLE>
You need to quit posting and sit back and read..
I've seen alot of posts from you lately, and all of them are bullshit.
its a common problem when you hit v-tech too hard. dont worry about it. no biggie</TD></TR></TABLE>
You need to quit posting and sit back and read..
I've seen alot of posts from you lately, and all of them are bullshit.
04-11-2007, 02:34 PM
#7
Member
Join Date: Mar 2007
Location: Lake Jackson, TX, U.S.
Posts: 1,299
Likes: 0
Received 0 Likes
on
0 Posts
Re: (EH2typeR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EH2typeR »</TD></TR><TR><TD CLASS="quote">i think you hit v-tech too hard.
its a common problem when you hit v-tech too hard. dont worry about it. no biggie</TD></TR></TABLE>
when will people realize that vtech is a freaking phone?!?!
you think he hit a walking phone or something?
its vtec
its a common problem when you hit v-tech too hard. dont worry about it. no biggie</TD></TR></TABLE>
when will people realize that vtech is a freaking phone?!?!
you think he hit a walking phone or something?
its vtec
Trending Topics
04-11-2007, 02:39 PM
#9
Member
Join Date: Mar 2007
Location: Lake Jackson, TX, U.S.
Posts: 1,299
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Boostedb20EH2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostedb20EH2 »</TD></TR><TR><TD CLASS="quote">Not to mention his post had no logical points what so ever.</TD></TR></TABLE>
x2
x2
04-11-2007, 02:45 PM
#10
Honda-Tech Member
Join Date: Nov 2006
Location: Really slow,, NJ, USA
Posts: 3,281
Likes: 0
Received 0 Likes
on
0 Posts
If the engine is making a ticking noise, sounds like it may have to do with either valves or knock. I would suggest getting it checked at a mechanic.
04-11-2007, 02:47 PM
#12
Member
Join Date: Mar 2007
Location: Lake Jackson, TX, U.S.
Posts: 1,299
Likes: 0
Received 0 Likes
on
0 Posts
Re: (EH2typeR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EH2typeR »</TD></TR><TR><TD CLASS="quote">keep riding his **** 
</TD></TR></TABLE>
dude post something logical or dont post at all
my guess is valves man thats my .02
</TD></TR></TABLE>dude post something logical or dont post at all
my guess is valves man thats my .02
04-11-2007, 02:57 PM
#14
Honda-Tech Member
Join Date: Aug 2005
Location: I miss the east coast, TX, USA
Posts: 2,695
Likes: 0
Received 1 Like
on
1 Post
If it's a rock stock motor, here are my two cents.
Unless you down shifted and revved to 10k accidentally, then all that is happening is you are now hearing the tick that was there all along. You already checked valve specs and they were in at .007 and .008. If there were bent valves, then the adjustment would be off because the valve won't close all the way if it's bent.
90% of vtec motors have LMA tick and it's just a fact of life when they get older. You can either replace LMA's or just deal with the tick.
I would be willing to go out on a limb and say you are fine and you just noticed this because now you "think" something is wrong. There is no such thing as hitting the limiter "too hard" when you are accelerating.
And edit your user name, remove the H, it's rediculous
Unless you down shifted and revved to 10k accidentally, then all that is happening is you are now hearing the tick that was there all along. You already checked valve specs and they were in at .007 and .008. If there were bent valves, then the adjustment would be off because the valve won't close all the way if it's bent.
90% of vtec motors have LMA tick and it's just a fact of life when they get older. You can either replace LMA's or just deal with the tick.
I would be willing to go out on a limb and say you are fine and you just noticed this because now you "think" something is wrong. There is no such thing as hitting the limiter "too hard" when you are accelerating.
And edit your user name, remove the H, it's rediculous
04-11-2007, 02:59 PM
#15
Thread Starter
Join Date: Apr 2007
Location: perry, ga, usa
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Boostedb20EH2)
ok man the manifold is a jg edlebrock
aem fuel rail
aem pressure reg
full cat back only had it a few months
other than that every thing is stock and if i dont post back its because i have hit my limit on post while in on trial period
aem fuel rail
aem pressure reg
full cat back only had it a few months
other than that every thing is stock and if i dont post back its because i have hit my limit on post while in on trial period
04-13-2007, 01:24 PM
#19
Junior Member
Join Date: Nov 2006
Location: Everything gets stolen, PA, US
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Jay_Sensing)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jay_Sensing »</TD></TR><TR><TD CLASS="quote">If it's a rock stock motor, here are my two cents.
Unless you down shifted and revved to 10k accidentally, then all that is happening is you are now hearing the tick that was there all along. You already checked valve specs and they were in at .007 and .008. If there were bent valves, then the adjustment would be off because the valve won't close all the way if it's bent.
90% of vtec motors have LMA tick and it's just a fact of life when they get older. You can either replace LMA's or just deal with the tick.
I would be willing to go out on a limb and say you are fine and you just noticed this because now you "think" something is wrong. There is no such thing as hitting the limiter "too hard" when you are accelerating.
And edit your user name, remove the H, it's rediculous </TD></TR></TABLE>
i honoestly agree my **** ticks too and its really annoying. if thats ur problem OP i wouldnt really freak out over it
Unless you down shifted and revved to 10k accidentally, then all that is happening is you are now hearing the tick that was there all along. You already checked valve specs and they were in at .007 and .008. If there were bent valves, then the adjustment would be off because the valve won't close all the way if it's bent.
90% of vtec motors have LMA tick and it's just a fact of life when they get older. You can either replace LMA's or just deal with the tick.
I would be willing to go out on a limb and say you are fine and you just noticed this because now you "think" something is wrong. There is no such thing as hitting the limiter "too hard" when you are accelerating.
And edit your user name, remove the H, it's rediculous
</TD></TR></TABLE>i honoestly agree my **** ticks too and its really annoying. if thats ur problem OP i wouldnt really freak out over it
04-13-2007, 02:00 PM
#20
Honda-Tech Member
Join Date: May 2005
Location: Bajiniashyu No Richomondo Desu
Posts: 2,918
Likes: 0
Received 0 Likes
on
0 Posts
Re: (94c1v1cex)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 94c1v1cex »</TD></TR><TR><TD CLASS="quote">
when will people realize that vtech is a freaking phone?!?!
you think he hit a walking phone or something?
its vtec</TD></TR></TABLE>
He was just joking I hope, but there comes a point where "vtech" jokes just aren't even that funny anymore.
when will people realize that vtech is a freaking phone?!?!
you think he hit a walking phone or something?
its vtec</TD></TR></TABLE>
He was just joking I hope, but there comes a point where "vtech" jokes just aren't even that funny anymore.
04-13-2007, 03:13 PM
#22
Member
Join Date: Mar 2007
Location: Lake Jackson, TX, U.S.
Posts: 1,299
Likes: 0
Received 0 Likes
on
0 Posts
Re: (. a d a m)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by . a d a m »</TD></TR><TR><TD CLASS="quote">He was just joking I hope, but there comes a point where "vtech" jokes just aren't even that funny anymore. </TD></TR></TABLE>
ya i was just messin around nothin personal i just think its funny
</TD></TR></TABLE>ya i was just messin around nothin personal i just think its funny
04-14-2007, 12:40 AM
#24
Thread Starter
Join Date: Apr 2007
Location: perry, ga, usa
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Re: (anavrin351)
i mean it still runs ok.its the tick that worries me.hey but i would like to thank the ones that tried to help and to you other guys get a life man this is not the place to act like kids .......ok.
